Network switches
EUR83,45
Intellinet 6-port Fast Ethernet switch with 4 PoE ports (1 x High-Power PoE)
6 ports
Best selling Network switches from Intellinet
This page always stays fresh and updates automatically.
1. Intellinet 6-port Fast Ethernet switch with 4 PoE ports (1 x High-Power PoE)
A fast Ethernet PoE switch with extend mode and a lot of PoE power - ideal for IP camera installations. The 6-port fast Ethernet switch with 4 PoE ports from Intellinet Network Solutions stands out with useful features that are particularly beneficial for IP camera installations. A manual PoE extend mode – activated at the flip of a switch – reduces network speed and extends PoE support up to 250 m (820 ft.), which is ideal for remote IP cameras and other PoE devices.
Save time and money with Power over Ethernet. Three of its four PoE ports deliver data and power up to 30 W each to IEEE 802.3at or IEEE 802.3af-compliant PoE devices such as wireless access points, VoIP phones, and IP cameras. One high-power PoE port even delivers up to 60 W with a total PoE power budget of 65 watts. Devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload, and high-voltage protection function, your equipment is well protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ splitter.
2. Intellinet IC Intracom INT Switch 16Port Gigabit Ethernet PoE WebManaged
You wanted more power. We listened to you.
The Intellinet 16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports (561198) is an excellent solution for transmitting data and power to PoE-compatible devices over Cat5e or Cat6 network cables. Equipped with 16 Gigabit ports (all supporting 802.3at/af PoE/PoE+), this switch provides power for access points, VoIP phones, IP cameras, and much more, while delivering transmission speeds of up to 1000 Mbps.
Power over Ethernet 802.3at
This switch supports the IEEE 802.3at protocol, delivering up to 30 watts of power per port. Devices compliant with IEEE 802.3af or IEEE 802.3at connected to the switch do not require additional power supplies, saving significant costs and time on electrical wiring, and eliminating a lot of cable clutter and adapters in exposed areas like walls and ceilings.
Network switches
EUR399,11
Intellinet IC Intracom INT Switch 16Port Gigabit Ethernet PoE WebManaged
16 ports
3. Intellinet 8-Port 2.5G Ethernet PoE+ Switch
Next-Gen 2.5 Gbit Desktop 5-Port PoE Switch - supports 10/100/1000/2500 Mbit/s and Power over Ethernet 802.3at. The 8-Port 2.5G Ethernet Unmanaged PoE+ Switch from Intellinet Network Solutions delivers data and power to PoE-compatible devices via network cables. Equipped with eight Multi-Gigabit Ethernet PoE+ copper ports, this switch provides power for Wi-Fi access points, VoIP phones, and more with data transfer rates of up to 2500 Mbit/s.
The 2.5G capability eliminates bottlenecks - ideal for bandwidth-intensive Wi-Fi 6 IEEE 802.11ax access points and more. Since the introduction of Wi-Fi 6 (and even with its predecessor Wi-Fi 5 / 802.11ac), standard Gigabit Ethernet ports have reached their bandwidth limits when connecting to high-speed Wi-Fi networks. The support for 2.5GBASE-T can supply access points faster and more efficiently, which also applies to other network devices in your enterprise network.
High-Power PoE+ with an output power of up to 30 watts. This switch supports the IEEE 802.3at protocol, allowing up to 30 W output power per port. IEEE802.3af or IEEE802.3at compliant devices connected to the switch do not require additional power supplies, saving time and money on electrical installations. Additionally, power supplies and separate power cables become unnecessary, which can create unsightly cable clutter when installing devices on ceilings and walls. Any combination of PoE and non-PoE devices is supported, and the PoE protection function against short circuits, overloads, and voltage surges protects your network equipment.
Key features: Management functions, Switch type Unmanaged.
4. Intellinet 8 Port Gigabit Ethernet Switch
The INTELLINET NETWORK SOLUTIONS 8-port Gigabit Ethernet switch is perfect for home and small office applications, and its high speed meets all network requirements. The metal housing provides good protection and the compact design also allows for desktop installation.
The desktop switch with eight Gigabit Ethernet ports offers high performance for fast data transfer to support disk mirroring, backup, large image transfer and other bandwidth-intensive applications.
High performance, half and full duplex with zero packet loss. Flow control support for optimal performance. Supports up to 8192 MAC addresses. 128 KB buffer memory. Supports Jumboframes up to 9 kBytes. Store and Forward Switch Architecture. Non-blocking wire-speed forwarding and filtering
5. Intellinet 4x RJ045, PoE
The Gigabit PoE Extender is designed to double the range of a Gigabit Power over Ethernet connection. The Intellinet Network Solutions 4-Port Gigabit Ultra PoE Extender extends the connection distance from a PoE source to four output devices by up to 100 meters over Cat5e or Cat6 cables. This PoE extender does not require an additional power supply, as it draws its power from the PoE input.
Lower cabling costs are a significant advantage of this Ultra PoE extender, as it helps avoid the expenses associated with running AC power lines for a wireless access point, a network camera, or an IP phone. Simply connect the PoE extender to the LAN switch port using existing Cat5e/6/6a cables to deliver DC power and transmit data.
The Intellinet Network Solutions 4-Port Gigabit Ultra PoE Extender complies with the Power over Ethernet 802.3bt standard and supports the IEEE 802.3bt protocol over four pairs (4PPoE), allowing for a power consumption of 90 watts. It forwards data at Gigabit speeds and provides up to 30 watts per port for connected devices that meet the IEEE 802.3at or IEEE 802.3af standards. The cable length at both ends can be up to 100 meters, increasing the total distance between the PoE source and the device to 200 meters.
This PoE extender is designed for easy installation. To set it up, connect the "PoE In" port to your PoE injector or PoE switch and connect the "PoE Out" ports to the PoE devices you wish to connect, such as a VoIP phone and a PoE network camera.
6. Intellinet Desktop Gigabit Switch
The 8-Port Gigabit Ethernet PoE+ Switch (560641) from Intellinet Network Solutions is an excellent solution for transmitting data and power to PoE-compatible devices over Cat5e or Cat6 network cables. Equipped with eight Gigabit ports (all supporting 802.3at/af PoE/PoE+), this switch provides power to access points and bridges, VoIP phones, IP cameras and more, while delivering transmission speeds up to 1000 Mbps. This switch supports the IEEE 802.3at protocol, delivering up to 30 watts of power per port. IEEE802.3af or IEEE802.3at compliant devices connected to the switch do not require additional power, saving significant cost and time in running power lines and eliminating a lot of cable clutter and adapters in exposed locations such as walls and ceilings. Any combination of PoE and non-PoE devices is supported, and thanks to protection against short circuits, overloads and surges, your equipment is well protected. For devices that do not support the 802.3at/af standard (older access points or network cameras), we recommend using an Intellinet PoE/PoE+ splitter.
7. Intellinet 5-Port 2.5G Ethernet PoE+ Switch
Next-Gen 2.5 Gbit Desktop 5-Port PoE Switch - supports 10/100/1000/2500 Mbit/s and Power over Ethernet 802.3at. The 5-Port 2.5G Ethernet Unmanaged PoE+ Switch from Intellinet Network Solutions delivers data and power to PoE-compatible devices via network cables. Equipped with five Multi-Gigabit Ethernet PoE+ copper ports, this switch provides power for Wi-Fi access points, VoIP phones, and more, with data transfer rates of up to 2500 Mbit/s.
The 2.5G capability eliminates bottlenecks and is ideal for bandwidth-intensive Wi-Fi 6 IEEE 802.11ax access points and more. Since the introduction of Wi-Fi 6 (and even with its predecessor Wi-Fi 5 / 802.11ac), standard Gigabit Ethernet ports reach their bandwidth limits when connecting to high-speed Wi-Fi networks. The support for 2.5GBASE-T can supply access points faster and more efficiently, which also applies to other network devices in your enterprise network.
High-Power PoE+ with output power of up to 30 watts. This switch supports the IEEE 802.3at protocol, allowing up to 30 W output power per port. IEEE802.3af or IEEE802.3at compliant devices connected to the switch do not require additional power supplies, saving time and money on electrical installations. Additionally, power supplies and separate power cables become unnecessary, which can create unsightly cable clutter, especially for endpoint installations on ceilings and walls. Any combination of PoE and non-PoE devices is supported, and the PoE protection feature against short circuits, overloads, and overvoltage protects your network equipment.
Key features: Management functions, Switch type Unmanaged, Number of basic switching RJ-45 Ethernet ports 5, Basic Switching RJ-45 Ethernet Ports type 2.5G Ethernet (100/1000/2500).
8. Intellinet PoE-powered 5-port Gigabit switch with PoE passthrough
The PoE-powered 5-Port Gigabit Switch with PoE Passthrough from Intellinet Network Solutions is designed to draw power from a PoE switch or injector and transmit both data and power to a range of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports, this switch can power up to four wireless LAN access points and bridges, VoIP phones, or IP video cameras, drawing its own power from the PoE switch it is connected to, while delivering network speeds of up to 1,000 Mbps.
9. Intellinet 24-Port PoE Gigabit Switch Web-Managed 2 GBIC SFP Ports Output Power up to 30 watts per port...
The 24-Port PoE Web-Managed Desktop Gigabit Switch from Intellinet Network Solutions is an excellent solution for transmitting data and power to PoE-compatible devices via Cat5e or Cat6 network cables. Equipped with 24 Gigabit ports (all supporting 802.3at/af PoE/PoE+), this switch provides power for access points and bridges, VoIP phones, IP cameras, and much more, while delivering transmission speeds of up to 1000 Mbps.
Network switches
EUR415,01
Intellinet 24-Port PoE Gigabit Switch Web-Managed 2 GBIC SFP Ports Output Power up to 30 watts per port...
24 ports
10. Intellinet 5Port PoE Gigabit Switch PoEPassthrough
Maximum PoE Efficiency with PoE Passthrough Technology
This 5-Port PoE+ Gigabit Switch from Intellinet Network Solutions features PoE Passthrough Technology as its main highlight. It allows the switch to be powered either by the included power supply or alternatively through the PD port. This means that not only connected PoE devices but also the placement of the switch can be completely independent of available power outlets, saving significant costs on cabling. Due to this feature, it can also be used as a PoE extender.
Power over Ethernet 802.3at
This switch supports the IEEE 802.3at protocol, delivering up to 30 watts of power per port. Devices compliant with IEEE 802.3af or IEEE 802.3at connected to the switch do not require additional power supplies, resulting in substantial savings in both costs and time for electrical wiring, as well as reducing cable clutter and adapters in exposed areas.
Product order
See all products