Our universal controllers and I/O products use Click and Go control logic, which incorporates our active monitoring technology and supports a versatile range of OT/IT protocols. This enables you to easily configure, deploy, and realize IIoT applications such as energy monitoring, plant monitoring, and machine OEM applications.

Universal controller with 6 digital inputs, 6 relays, Click and Go control logic, and an operating temperature range of -10 to 60°C.

Control logic:

• Language: Click and Go

Input/output interface:

• Digital input channels: 6
• Relay channels: 6
• Buttons: Reset button
• Rotary switch: 0 to 9
• Insulation: 3 kV DC or 2 kV RMS

Digital inputs:

• Connector: Screwable Euroblock terminal
• Sensor type: Dry contact, Wet contact (NPN or PNP)
• I/O mode: Digital input or event counter
• Dry contact: On: Short circuit to GND, Off: open
• Wet contact (DI to GND): On: 0 to 3 VDC, Off: 10 to 30 VDC
• Counter frequency: 900 Hz
• Digital filter time interval: Software configurable
• Points per COM: 3 channels

Relay:

• Connection: Screwable Euroblock terminal
• Type: Form A (N.O.) Power relay
• I/O mode: Relay or pulse output
• Pulse output frequency: 0.3 Hz at rated load
• Rated contact current:
• Inductive load: 2 A @ 30 VDC, 250 VAC, 110 VAC
• Resistive load: 5 A @ 30 VDC, 250 VAC, 110 VAC
• Minimum permissible load: 1 A @ 5 VDC
• Contact resistance: 100 milli-ohms (max)
• Electrical service life: 100,000 switching cycles at 5 A resistive load
• Mechanical service life: 1,000,000 switching cycles
• Note: The ambient humidity must not condense and must be between 5 and 95%. The relays may malfunction if operated in environments with high condensation below 0°C.

LED interface:

• LED indicators: PWR, RDY, serial, I/O status

Ethernet interface:

• 10/100BaseT(X) ports (RJ45 connection): 1
• Magnetic insulation protection: 1.5 kV (built-in)

Ethernet software features:

• Configuration options: Windows Utility (ioAdmin), Web Console (HTTP)
• Industrial protocols: Modbus TCP Server (Slave).