The SV 210 - Signal Distributor is used to cleanly and reliably distribute the signals of so-called Sincos encoders to multiple end devices. The end devices can be controlled either with Sincos signals or with incremental pulses. At the two sine outputs, the distributor provides sine signals in the same format as at the input, including the reference pulse (if available from the encoder side). All sine signals use the voltage format of 1 Vss (differential), which is standard for industrial rotary encoders. Current signals according to the 11 µA standard are not supported by this device. At the two incremental outputs, the distributor delivers rectangular pulses, specifically one pulse per sine period and a zero pulse corresponding to the incoming reference pulse. The differential signals A, /A, B, /B, Z, /Z are fundamentally available. The output level can be selected separately for each of the two incremental outputs (range TTL 5 V to HTL max. 30 V).