The large wide one goes horizontally on the wall. The two small ones come vertically on the back of the TV and are then hung in the large one on the wall.

This mount is VESA 400x400 compatible and supports TVs up to 85". It should work normally.

Yep, screws are included. But I would keep better dowels ready...

Depending on the nature of the wooden wall and the screws used - no, no problem.

According to our information, the wall mount should be compatible with the TV. The VESA standard of 300 x 200 mm is given for both articles. Unfortunately, we have no information as to whether this would also fit with the configuration mentioned.

I set the vertical tilt and hung my TV. From memory it is possible to set the tilt as shown +3/-12°.

these are standard mounts in my opinion. i mounted my Sony 70inch without any problems. Just don't rely on the built-in spirit level....

Yes, it should work for any TV. Your TV should come with some washers/distances to compensate for the curve. Else the following product might be of interest: Hama Curved (Wand)

Thank you for the info! You can write a review here (give stars first): https://www.digitec.ch/de/s1/product/ratings/titan-bti-8060-wand-tv-wandhalterung-6338449#rating

I assume that your TV is 32" (81cm)? If this is the case, then this wall mount is not suitable because it is designed for TVs larger than 65" (165cm), although the VESA specification would basically be met. According to the Philips specification, a VESA-compatible wall mount of 400 x 200 mm is required for your TV. So pay attention to 2 points: 1. VESA 400x200 compatible (you can filter this at Digitec). 2. min & max size fit your TV (check the specifications). Have fun looking for a suitable "hanger" :-) (https://www.philips.ch/c-p/32PFK6509_12/6000-series-flacher-smart-full-hd-led-fernseher-mit-2-seitigem-ambilight-und-smart-tv/technische-daten)

It's only a few centimetres and the wall distance recommended by Philips can't be kept by a long way.

Dear Manuel The bracket works perfectly for a 55 inch TV, mine is a Sony. Greetings

The maximum inch size for this mount is 85", so you won't have any problems with your 55". According to the description, this wall mount fits any brand of TV.

According to my information, the wall distance is 4 cm.

Can you fix the TV in a different position or tighten the screws a little tighter for the inclined position?

Yes, that fits.