Best Fuba products in the Dishes + Antennas category
On this page you'll find a ranking of the best Fuba products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Fuba DAA 780 A
An LNB mount with die-cast aluminum housing, a feed arm that provides space for antenna cables and protects against dirt as well as moisture and a lockable compartment to keep DiSEqC relays from getting wet: The anthracite DAA 780 A parabolic antenna from Fuba offers all this.
The high-quality materials make the antenna, which has a diameter of 78 centimeters, the perfect investment in carefree satellite TV experience. The aluminum reflector is powder-coated and fully operational even under difficult weather conditions.
2. Fuba DAA 780 W - 10.75 - 12.75 GHz - White - Aluminum - 78 cm
These aluminum parabolic antennas have a diameter of 78 centimeters. The mast mount and rear part are already pre-assembled at the factory, ensuring extremely easy and quick installation. In the first step, the rear part is mounted to the mast using a mounting clamp. After that, the installation of the LNB and cables can take place. Each Fuba parabolic antenna is equipped with cable clips that allow the cables to be routed securely and permanently within the feed arm, providing ideal cable management from the LNB to the back of the antenna. Finally, the reflector is hung in the designated holding device and secured to the rear part with the included V4 stainless steel screws.
All Fuba parabolic antennas undergo extensive wind load tests and salt chamber tests. All parts are made from extremely corrosion-resistant and durable materials, ensuring a high quality standard and trouble-free satellite reception for many years. The latest version of this proven antenna is equipped with an aluminum die-cast LNB holder, which is nearly indestructible and very easy to install. The LNB is connected to the LNB holder before installation and then simply slid onto the feed arm and secured.
The back of the antenna features a lockable installation compartment that can accommodate up to 4 DiSEqC relays or multi-switches. The entire signal distribution from 2 satellite positions to up to 4 connections can thus be housed directly within the antenna.
- Tested for wind load and weather resistance
- All parts made from extremely corrosion-resistant and durable materials
- High quality standard and trouble-free satellite reception for many years.
Dishes + Antennas
EUR119,–
Fuba DAA 780 W - 10.75 - 12.75 GHz - White - Aluminum - 78 cm
Parabolic antenna, UKW / MW / LW
3. Fuba SAT Antenna DAA 780 R Satellite
The aluminium reflector is powder coated and fully operational even in difficult weather conditions.
Dishes + Antennas
−23%
EUR119,– was EUR154,59
Fuba SAT Antenna DAA 780 R Satellite
Parabolic antenna, DAB/ DAB+, 3G / 2G / GSM
4. Fuba DAL 800 R - 10.75 - 12.75 GHz - 36.8 - 38.5 - 27 dB - 0 - 90° - 25° - 2.2°
The Fuba DAL 800 R is a powerful satellite antenna designed for receiving DVB-S and DVB-S2 signals. With a diameter of 80 cm and a robust aluminum construction, it is ideal for outdoor use. The antenna offers a frequency bandwidth of 10.75 to 12.75 GHz and a noise figure of 36.8 to 38.5 dB, ensuring excellent signal quality. The X-polarization with an antenna gain of 27 dB provides reliable reception performance, even under challenging conditions. The Fuba DAL 800 R is a dependable choice for anyone seeking a high-quality satellite reception solution.
- Frequency range: 10.75 - 12.75 GHz
- Noise figure: 36.8 - 38.5 dB
- Antenna gain: 27 dB
- Robust aluminum construction for outdoor use.
Dishes + Antennas
EUR101,03
Fuba DAL 800 R - 10.75 - 12.75 GHz - 36.8 - 38.5 - 27 dB - 0 - 90° - 25° - 2.2°
Parabolic antenna, 27 dB, DVB-S / -S2
5. Fuba DAT 650 - Indoor,Outdoor - White - 1.5 m - 174 - 863 MHz - 19 dB - DVB-T,DVB-T2
The Fuba DAT 650 planar antenna is an active DVB-T2 antenna suitable for outdoor or indoor use. With its excellent reception values combined with the built-in amplifier, interference-free DVB-T reception is guaranteed.
Dishes + Antennas
EUR39,76
Fuba DAT 650 - Indoor,Outdoor - White - 1.5 m - 174 - 863 MHz - 19 dB - DVB-T,DVB-T2
Indoor antenna, 19 dB, DVB-T / -T2
6. Fuba DAA 650 G - 10.75 - 12.75 GHz - gray - aluminum - 65 cm
These aluminum parabolic antennas have a diameter of 65 centimeters. The mast mount and rear part are already pre-assembled at the factory. This guarantees an extremely easy and quick installation. In the first step, the rear part is mounted to the mast using a mounting clamp. After that, the installation of the LNB and cables can take place. Each Fuba parabolic antenna is equipped with cable clips, allowing the cables to be securely and permanently routed in the feed arm for an ideal cable management from the LNB to the back of the antenna. Finally, the reflector is hung in the designated holding device and secured to the rear part with the included V4 stainless steel screws. All Fuba parabolic antennas undergo extensive wind load tests as well as salt chamber tests. All components are made from extremely corrosion-resistant and durable materials. This ensures a high quality standard and uninterrupted satellite reception for many years. The latest version of this proven antenna comes with an aluminum die-cast LNB holder. This is nearly indestructible and very easy to install. The LNB is connected to the LNB holder before installation and then simply slid onto the feed arm and secured. - Tested for wind load and weather resistance - All parts made from extremely corrosion-resistant and durable materials - High quality standard and uninterrupted satellite reception for many years.
Dishes + Antennas
EUR114,76
Fuba DAA 650 G - 10.75 - 12.75 GHz - gray - aluminum - 65 cm
Parabolic antenna, DAB/ DAB+, UKW / MW / LW
7. Fuba DAA 650 R - 10.75 - 12.75 GHz - Beige - Red - Aluminum - 65 cm
These aluminum parabolic antennas have a diameter of 65 centimeters. The mast mount and back panel are already pre-assembled at the factory, allowing for extremely easy and quick installation. In the first step, the back panel is mounted to the mast using a mounting clamp. After that, the installation of the LNB and cable can take place. Each Fuba parabolic antenna is equipped with cable clips that allow the cables to be routed securely and permanently in the feed arm, ensuring ideal cable management from the LNB to the back of the antenna. Finally, the reflector is hung in the designated holding device and securely fastened to the back panel with the included V4 stainless steel screws. All Fuba parabolic antennas undergo extensive wind load tests as well as salt chamber tests. All parts are made from extremely corrosion-resistant and durable materials, ensuring a high quality standard and trouble-free satellite reception for many years. The latest version of this proven antenna comes with an aluminum die-cast LNB holder that is nearly indestructible and very easy to install. The LNB is connected to the LNB holder before installation and then simply slid onto the feed arm and secured with screws.
Main features:
- Antenna input frequency range: 10.75 - 12.75 GHz
- Weight & dimensions: Diameter 65 cm
- Color: Beige, Red
- Material: Aluminum.
Dishes + Antennas
EUR128,46
Fuba DAA 650 R - 10.75 - 12.75 GHz - Beige - Red - Aluminum - 65 cm
Parabolic antenna, DVB-S / -S2
8. Fuba DAA 650 W - 10.75 - 12.75 GHz - White - Aluminum - 65 cm
These aluminum parabolic antennas have a diameter of 65 centimeters. The mast mount and rear part are already pre-assembled at the factory, ensuring extremely easy and quick installation. In the first step, the rear part is mounted to the mast using a mounting clamp. After that, the installation of the LNB and cables can take place. Each Fuba parabolic antenna is equipped with cable clips, allowing the cables to be securely and permanently routed in the feed arm for an ideal cable management from the LNB to the back of the antenna. Finally, the reflector is hung into the designated holding device and securely fastened to the rear part with the included V4 stainless steel screws. All Fuba parabolic antennas undergo extensive wind load tests and salt chamber tests. All parts are made from extremely corrosion-resistant and durable materials, ensuring a high quality standard and trouble-free satellite reception for many years. The latest version of this proven antenna comes with an aluminum die-cast LNB holder, which is nearly indestructible and very easy to assemble. The LNB is connected to the LNB holder before installation and then simply pushed onto the feed arm and secured. - Tested for wind load and weather resistance - All parts made from extremely corrosion-resistant and durable materials - High quality standard and trouble-free satellite reception for many years.
Dishes + Antennas
EUR130,66
Fuba DAA 650 W - 10.75 - 12.75 GHz - White - Aluminum - 65 cm
Parabolic antenna, DAB/ DAB+, DVB-S / -S2
9. Fuba DAL 800 A
The DAL 800 A is a satellite antenna measuring 74 x 84 in anthracite. This very installation-friendly antenna can be set up in just a few steps and features a pre-assembled foldable feed arm. The DAL 800 A impresses with an LNB holder and a sturdy rear panel made of aluminum die-cast. It is expandable for receiving multiple satellites.
10. Fuba DAA 650 A - 10.75 - 12.75 GHz - gray - aluminum - 65 cm
These aluminum parabolic antennas have a diameter of 65 centimeters. The mast mount and rear part are already pre-assembled at the factory, ensuring extremely easy and quick installation. In the first step, the rear part is mounted to the mast using a mounting clamp. After that, the installation of the LNB and cable can take place. Each Fuba parabolic antenna is equipped with cable clips that allow the cables to be routed securely and permanently in the feed arm, providing an ideal cable management solution from the LNB to the back of the antenna. Finally, the reflector is hung in the designated holding device and secured to the rear part with the included V4 stainless steel screws.
All Fuba parabolic antennas undergo extensive wind load testing and salt chamber tests. All components are made from extremely corrosion-resistant and durable materials, ensuring a high quality standard and trouble-free satellite reception for many years. The latest version of this proven antenna comes with an aluminum die-cast LNB holder that is nearly indestructible and very easy to install. The LNB is connected to the LNB holder before installation and then simply pushed onto the feed arm and secured with screws.
- Tested for wind load and weather resistance
- All parts made from extremely corrosion-resistant and durable materials
- High quality standard and trouble-free satellite reception for many years.
Dishes + Antennas
EUR90,90
Fuba DAA 650 A - 10.75 - 12.75 GHz - gray - aluminum - 65 cm
Parabolic antenna, UKW / MW / LW