Top rated PoE injectors
This page always stays fresh and updates automatically.
1. Ubiquiti U-POE-AF
With the help of the Ubiquiti PoE Injector, the cabling effort for installing PoE-enabled devices, such as IP network cameras, is minimized. This eliminates the need for a separate power line, allowing the network to be expanded even in areas where there are no power outlets or electrical wiring. The PoE Injector U-POE-AF is fully compatible with the IEEE802.3af standard and provides an output power of 15.3 watts.
What our customers think
Pro
- Very small and elegant
- Works and is inexpensive
- Small and light
Contra
- Swiss cable too long and in black
- The CH cable is black
- Supplied with EU plug and CH plug
2. Ubiquiti U-POE-AT
An adapter that can power UniFi PoE devices, reduce dependency on PoE switch power, and provide a Gigabit LAN connection.
What our customers think
Pro
- Works :D
- Supplied with CH plug 👍🏻
- up to 30W
Contra
- Not included in the AP
- Where is the Swiss cable?
- a bit clunky
3. TP-Link Tl-Poe150s
Power over Ethernet refers to a technology that supplies power to network-capable devices via an 8-wire Ethernet cable. The TP-LINK 1-port injector combines power and Ethernet in a single RJ-45 port. You simply need to connect the injector to a power source, plug in the Ethernet cable, and you can already supply a PoE-enabled network device with both power and data on the other side of the TL-POE150S. Output voltage: 48 VDC, 15.4 W, including power supply.
What our customers think
Pro
- Simple installation
- Value for money
- easy to hide (I mounted it under my desk
Contra
- Relatively large mains plug
- gets a little warm
4. Ubiquiti Passive PoE injector
The passive PoE Injector POE-48-24W-G from Ubiquiti supplies power to PoE-enabled devices when they are not connected to a power source, such as a PoE-enabled switch. Both functionality and range can be expanded with additional Ubiquiti products. The Ubiquiti Adapter POE-48-24W-G features built-in protection for all connected PoE devices. This includes protection against overcurrent and voltage surges, maximum surge load, and peak current. Additionally, this easy-to-use adapter is ready for immediate use. It is suitable for UAP-Pro and RocketM2-Ti as well as RocketM5-Ti and serves as a replacement part for UAP-Pro and Rocket-Ti.
5. Ubiquiti 2.5G PoE+ adapter
An adapter that can power UniFi PoE+ devices, reduce reliance on PoE switch power and provide a multi-gigabit LAN connection.
What our customers think
Pro
- Incl CH plug, no adapter
- Don't know, can't try it out...
Contra
- The additional cable is not original
- Additional cable with Swiss plug (black)
6. Ubiquiti U-POE++
PoE Adapter. 802.3af/at/bt PoE 60 Watt. Max. power per PoE port: 60 W. RJ-45 speed: 10/100/1000 Mbit/s. Even more power for UA Hub, G4 PTZ, and other PoE devices. Surge, spike, and overcurrent protection. LED display for status monitoring. An adapter that can power UniFi PoE devices with wireless mesh applications or relieve PoE switch power dependencies. Ubiquiti Networks is an American manufacturer of high-performance networking components. Ubiquiti's goal is to provide cutting-edge and easy-to-implement communication solutions for a global customer base. The company was founded in 2005 and initially produced Wi-Fi adapters for PCs. Later, the product range expanded to include devices such as Wi-Fi routers, particularly for outdoor use. Meanwhile, the company also manufactures switches and surveillance cameras. Ubiquiti products generally impress with their superior performance, clever mechanical design, and ease of use. Power over Ethernet (PoE). With Power over Ethernet, you can power compatible devices through the network cable. This significantly reduces cabling effort for end devices such as wireless access points, IP phones, and IP cameras, while also providing high flexibility in device placement. 802.3bt PoE. The IEEE 802.3bt standard is also known as Four-Pair Power over Ethernet (4PPoE) or PoE. By using all available pairs for power transmission, PoE increases the power to 70 to 100 watts. The idea behind this is to power the entire workspace through the data cable. This way, energy-efficient computers with monitors, including phones, could be operated via a single LAN cable.
What our customers think
Pro
- Does not get hot
- Sufficient for many
- Power 60W
7. Ubiquiti PoE injector
The Ubiquiti POE-50-60W Injector is a Power over Ethernet adapter that provides power to PoE devices in environments where no electrical outlet is available.
What our customers think
Pro
- fits PoE Switch USW-Flex 5 Port
- not too big
Contra
- supplied with German cable only
- Wrong cable
- Unfortunately, the power cable has a German Schuko plug. This is not mentioned anywhere
8. TP-Link PoE+ Injector Adapter TL-POE160S Ethernet LAN (RJ-45) Ports 1x10
PoE Injector. 802.3af/at PoE 30 Watt. Power over Ethernet per port: 30 W. RJ-45 speed: 1 Gbit/s, 10/100/1000 Mbit/s. Reduces infrastructure costs by simultaneously transmitting data and power over an Ethernet cable. Automatically detects and delivers the exact power needed to meet the device's requirements. The wall-mounted and desktop design is suitable for most installation scenarios. Plug & Play installation, requires no configuration, integrated power supply. Power over Ethernet (PoE). With Power over Ethernet, you can power compatible devices through the network cable. This significantly reduces cabling effort for end devices such as wireless access points, IP phones, and IP cameras, while also providing high flexibility in device placement. 802.3at PoE. The IEEE 802.3at standard provides a maximum of 25.4 watts of power per PoE port with a voltage of up to 50 volts. The standard assumes that after line losses, 21.90 watts of usable power remain or may be drawn to avoid exceeding the maximum power output. A Cat5e/6 cable with a maximum length of 100 m is recommended for PoE.
What our customers think
Pro
- Does not get warm (even in continuous operation)
- Simple installation
- Easy to operate
PoE injector
−23%
EUR22,29 was EUR29,–
TP-Link PoE+ Injector Adapter TL-POE160S Ethernet LAN (RJ-45) Ports 1x10
802.3af (PoE), 802.3at (PoE+), 30 W
9. Ubiquiti POE-24-12W-WH
PoE Injector, 24VDC, 12W, white. 24V passive PoE. PoE power per port: 12 W. RJ-45 speed: 10/100 Mbit/s. Protects against ESD damage. Ubiquiti Networks is an American manufacturer of high-performance networking components. Ubiquiti's goal is to provide state-of-the-art and easy-to-implement communication solutions for a global customer base. The company was founded in 2005 and initially produced Wi-Fi adapters for PCs. Later, the product range expanded to include devices such as Wi-Fi routers, particularly for outdoor use. Meanwhile, the company also manufactures switches and surveillance cameras. Ubiquiti products are generally characterized by their superior performance, clever mechanical design, and ease of use.
PoE injector
Quantity discount
EUR10,07 per piece for 2 units
Ubiquiti POE-24-12W-WH
Passive 24V PoE-in, 12 W
10. Ubiquiti PoE Injector POE-24-12W-G-WH 24 Volt GE passive, 12 Watt
The Ubiquiti POE-24-12W-G-WH PoE Adapter/Injector is the ideal solution for powering network devices through a single Ethernet cable. With its Gigabit Ethernet interface and an output voltage of 24 V, this PoE adapter provides reliable power for various devices, such as surveillance cameras, access points, or IP phones.
Product order
See all products