EUR68,66
Xiaomi Smart Humidifier 2
20 m²
Questions about Xiaomi Smart Humidifier 2
What would you like to know?
0 questions and answers
Helpful answer
Hi, it worked for us for a few months. We simply took the water from the tap. However, our appliance had a fault and water just ran out recently. It broke down. Out of interest, I took it apart and saw that the transducer was poorly attached to the housing. As a result, water got onto the circuit board and it burnt out. Overall, the device worked very well. Fortunately, Galaxus is a very good company and they refunded me the cost.
Helpful answer
This model is "only" a humidifier (but in my opinion a very good one). It does not have a filter or anything similar.
Yes you can. There is a little box to do so.
It's the same for me, but it shuts down. Software update should help
Helpful answer
There is no information at all in the instructions. In terms of output power (3.5l/h) it is comparable with Stadler Form Oskar 18W. Would say 50m2. Maybe that will help you as food for thought :-) LG, Marco
Helpful answer
I have filled it to the maximum and it is tight. You are probably dealing with a defect
I think they are the same perhaps a newer model?
Helpful answer
I‘d say for small rooms up to around 2.5 x 4 m
Helpful answer
Hello Sergej. It says on the packaging "works with alexa" and "works with Google Home". I haven't integrated it myself yet, but I assume that both are supported.
Yes, the appliance has a fragrance compartment
Thank you for sharing your experience with the Community.
You should still be able to rate the product, just via the product page and not via your customer account.
Where it is located
It is located under the top cover, usually as a small removable tray or a housing with an absorbent pad.
It is not connected to the water tank: the fragrance is diffused by evaporation, not by mist.
What to insert
Only essential oils or room fragrances.
Never water, detergents, alcohol or liquid mixtures not intended for aromatherapy.
How to use it step by step
Open the top lid of the humidifier.
Look for the small tray/aroma pad.
Pull out the holder (if removable).
Add 2-3 drops of essential oil to the pad.
Reinsert the holder and close the lid.
Switch on the humidifier: the fragrance will be gradually diffused.
Frequency of use
You can add new drops when the fragrance is no longer noticeable.
If you change fragrance, wash or replace the pad to avoid mixing.
Important warnings
Never put essential oils in the water tank: they can damage the ultrasound and plastic.
Only use good quality oils to avoid residue.
Do not overdo the drops: too many oils can saturate the pad and reduce diffusion.
Galaxus
3 months ago
It is suitable for rooms of about 10-15 m².
This indication is based on the misting capacity of 350 ml/h and the 4.5 l reservoir, which retailers report as suitable for humidifying medium-sized rooms around 10-15 m².
Automatically generated from the .The Xiaomi Smart Humidifier 2 does not have a built-in sensor to measure the ambient humidity, so in the Mi Home/Xiaomi Home app you will only see the status of the device (power on, fog level, amount of water, timer, etc.), but not the percentage of humidity in the room. To view the humidity, you need to pair it with an external Xiaomi sensor (e.g. Mi Temperature and Humidity Monitor 2) that integrates into the same app.
at a distance of 20cm max. 42db.
Helpful answer
Yes, it has a float that switches off the device (the ultrasound) when the water level is low.
The behaviour you describe on the Xiaomi Intelligent Humidifier 2 (switching off after <30 minutes + flashing orange light) is a fairly typical symptom.
The most common causes are these:
1. Tank not correctly positioned
This model has a level sensor/magnetic sensor:
if the reservoir is not inserted perfectly, the humidifier will run for a short time and then switch off.
Solution:
Remove the tank
Clean it and reposition it carefully until you feel it 'latch'.
Check that it is firmly seated on the base
2. Water level sensor blocked or dirty
If the sensor fails to detect water, the orange light flashes.
Solution:
Remove water
Clean the tank, float (if present) and sensor compartment
Fill it with clean water (preferably filtered water)
3. Scale or deposit in the ultrasonic module
A dirty ultrasonic disc can cause the device to fail after a few minutes.
Solution:
Empty the humidifier
Clean the metal disc with white vinegar + cotton wool
Rinse well
4. Safety mode / overheating protection
If it detects a lack of water or a problem in the flow, it goes into protection.
Galaxus
4 months ago
The humidifier also works without installing the app, as it can be operated manually. However, the app enables advanced functions such as remote control and individual humidity control.
Automatically generated from the .No. This is a humidifier, not a purifier. It does need cleaning from time to time, and decalcifying.
Cleaning the lid with a moving funnel
Switching off and disconnecting the humidifier: Before starting cleaning, ensure that the humidifier is switched off and disconnected from the electrical outlet for safety reasons.
Remove lid: Gently lift the lid with the mobile steam funnel.
Cleaning with soft cloth: Use a soft, damp cloth to remove dust and residues. Avoid the use of aggressive cleaning agents that could damage the material.
Drying: After cleaning, dry the cover thoroughly with a dry, soft cloth to prevent residual moisture.
General cleaning of the humidifier
Weekly cleaning: We recommend cleaning the entire device at least once a week. Use a soft, damp cloth to clean the main body and the filter casing.
Limescale removal: If you notice the presence of limescale, prepare a solution of citric acid and water (about 1 teaspoon of citric acid in 1 litre of water). Pour the solution into the tank and leave it for a few minutes, then gently scrub with a cotton wool pad or a soft bristle brush. Rinse thoroughly with clean water.
Cleaning the atomiser: Clean the atomiser with a soft cloth or cotton wool. After filling the tank with water, shake it gently to remove any residue, then empty it.
Additional tips
Use of distilled water: To prevent the build-up of minerals and limescale, it is advisable to use distilled or demineralised water.
Avoid the use of essential oils: The use of essential oils can damage the humidifier and impair air quality.
Dry completely: After each cleaning, ensure that all parts are completely dry before reassembling and reconnecting the humidifier.
Helpful answer
Yes, there is one, and it can be switched off via the app.
Hello,
What is your question ?
There seems to be a problem with your order. In this case, we will refer you to our Galaxus Assistant, which provides direct contact options so that you can be helped accordingly.
https://www.galaxus.ch/help
Former employee
1 year ago
Unfortunately, I couldn't find any Xiaomi flavour pads in the range. But as it is generally easy here. Other pads from manufacturers should generally also work, at most they need to be cut to size a little. E.G: Beurer LB 37 flavour pads (10 x)
no
Galaxus
1 year ago
Helpful answer
The appliance has an automatic control that keeps the humidity constant, which indicates that a hygro sensor is present. This sensor enables the appliance to automatically adjust the humidity output to ensure optimum humidity levels and avoid excess humidity.
Automatically generated from the .
The humidifier ensures better air quality in a room with an area of up to 70 m2.
Helpful answer
I have not found any official specifications, but I use the humidifier in my 18m3 office and am more than satisfied. Va with the knowledge that it is poorly insulated (there is a draught through the window) and the door to the corridor is always open.
30 of 32 questions