Best GripGrab products in the Overshoes category
On this page you'll find a ranking of the best GripGrab products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. GripGrab Arctic Waterproof Hi-Vis Thermal Shoe Covers
The Arctic Waterproof Hi-Vis Winter Shoe Cover is one of the warmest overshoes on the market and ideal for particularly cold days on the bike. Its high visibility features increase your visibility and safety in low light conditions. Made from 4mm waterproof neoprene and with a Hollow Fibre lining, they offer maximum thermal insulation. The Arctic Hi-Vis features IntelliSeal™, an ingenious technology that significantly increases both durability and water resistance.The Arctic Hi-Vis also rethinks traditional overshoe donning. This zipperless overshoe is put on before you put on your boot. This has several advantages:- Donning and fit on the shoe are significantly improved- Better fit over a wider range of footwear- No zipper means no chafing and makes for a more minimalist...
2. GripGrab AquaShield 2 Waterproof Road Overshoes
The waterproof GripGrab AquaShield 2 road bike overshoes are an evolution of the well-known GripGrab AquaShield, featuring a sturdier design and enhanced comfort. The zipperless design and anatomical cut provide a high level of comfort and waterproofing. Thanks to the stretch of the fabric, you can pull the overshoe up your leg before putting on your cycling shoes. The cuff should sit just below the calf muscle to ensure optimal protection for your leg and sock. After that, you put on your road cycling shoes, pull the overshoes over them, and secure them with the Velcro under the sole. These overshoes are characterized by a combination of PU-coated polyester and waterproof neoprene. The opening at the bottom is specifically designed for large road bike cleats. The neoprene area features a novel IntelliSeal silicone seal on the outside, creating a barrier around the bottom to prevent water ingress. The toe area has a newly developed rubber insert that protects against damage when stopping and walking. The waterproof GripGrab AquaShield 2 road bike overshoes are powerful, snug-fitting, and designed for waterproofing and durability; they are also easy to handle and comfortable. Pro tip: Remember to cover the ventilation holes in the soles of your cycling shoes (if present) to avoid getting wet feet when water seeps through the soles. Simply remove the insole from your shoes, seal the openings, and put the insole back in. Don’t let bad weather keep you from cycling!.
3. GripGrab Flandrien Waterproof Overshoes
The GripGrab Flandrien waterproof knitted road bike overshoes are inspired by the classic "Belgian Booties" that have been used by Flemish riders for decades. This new approach retains all the qualities of its historical predecessor: the soft material and the elastic, snug fit—while simultaneously propelling this classic into the modern age with its water-resistant membrane.
They withstand rain showers, keep your feet dry, and are not deterred by puddles. The three-layer construction with a fully waterproof membrane protects your feet from splashes and rain showers in winter. They are super soft, comfortable to wear, and thanks to their reinforced fabric on the underside, they are extremely durable.
The Flandrien waterproof knitted road bike overshoes combine minimalist style and subtle logos with the latest technologies. They provide riding comfort in any weather and timeless, classic design. The soft premium knitted fabric offers outstanding thermal insulation as well as protection from wind and splashes on cold, wet days.
The elastic knitted material wraps around your road bike shoes evenly, ensuring a snug and consistent fit. The zipperless design also reduces irritation, increases the product's lifespan compared to zippered models, and elevates your riding comfort to the next level.
Will my feet really stay dry with the GripGrab Flandrien waterproof knitted road bike overshoes? The membrane used in these overshoes is waterproof. As long as you don’t slide over cobblestones or otherwise damage them, your feet will stay dry! Of course, there are limits: they are not intended for knee-deep puddles or for cleaning with a pressure washer.
4. GripGrab AquaShield 2 Waterproof Gravel Overshoes
The waterproof GripGrab AquaShield 2 Gravel overshoes are an evolution of the well-known GripGrab AquaShield, featuring a more robust design and increased comfort. They are now available for both road bikes and in this gravel variant. The zipperless design and anatomical cut provide a high level of comfort and waterproofing. Thanks to the stretch of the fabric, you can pull the overshoe up your leg before putting on your cycling shoes. The cuff should sit just below the calf muscle to ensure optimal protection for the leg and sock. After that, you put on your cycling shoes, pull the overshoes over them, and secure them with the Velcro under the sole. The gravel version of the AquaShield 2 overshoes combines PU-coated polyester with neoprene and Kevlar. The toe area is protected with a rubber insert to prevent damage when stopping and walking, while the Kevlar under the forefoot adds extra durability. These two elements help protect the PU layer of the overshoe from damage caused by tires, pedals, and vegetation. The opening at the bottom is specifically designed for gravel shoes with small shoe plates, such as those in the SPD system, and shoe soles with studs. The waterproof GripGrab AquaShield 2 Gravel overshoes are powerful, snug-fitting, and designed for waterproofing and durability; at the same time, they are easy to handle and comfortable. Don't let bad weather stop you from cycling!.
5. GripGrab CyclinGaiter Overshoe
The CyclinGaiter solves a problem that affects most shoes and overshoes: water running down the legs and into the shoe or overshoe. The CyclinGaiter closes this gap. - Type: gaiter - Size information: Size is normal - Fit: tight fit Material shoe - Material layers: 1-ply - Type upper: neoprene - Upper: 80 % rubber, 14 % polyamide, 6 % polyurethane - Features: waterproof Equipment shoe - Type closure system: without (slip-on) - Features: reflective elements
6. GripGrab CyclinGaiter Hi-Vis Overshoe
The CyclinGaiter Hi-Vis addresses a problem that affects most shoes and overshoes: water running down the legs into the shoe or overshoe. The CyclinGaiter closes this gap. Its high visibility enhances your safety when you're out in low light conditions.
Details:
- High visibility
- Type: Gaiter
- Size information: True to size
- Fit: Close-fitting cut
Shoe Material:
- Features: Waterproof
- Material layers: Single-layer
- Upper material type: Synthetic fibers
- Upper material: 80% rubber, 14% polyester, 6% polyurethane
Shoe Equipment:
- Closure system type: None (Slip-on)
- Special features: Reflective elements.
7. GripGrab RaceThermo II Waterproof Winter Road Shoe Covers
The PACR waterproof winter road bike shoe covers have been carefully designed for performance-oriented cyclists seeking protection in challenging winter conditions. Made from 3 mm bio-based neoprene, these covers ensure that your feet stay warm and dry while protecting you from cold and wet conditions during intense rides. The innovative IntelliSeal™ technology, combined with fully waterproof seams, creates a secure barrier that keeps your feet dry and comfortable during your winter cycling adventures.
Reinforced with an anti-abrasion wear protection on the sole, these shoe covers feature a robust, wear-resistant layer on the sole, providing reliable grip and protection against abrasion. The crank abrasion protection further shields the covers from wear and tear, ensuring durability and resilience under demanding conditions. Reflective details enhance visibility in low-light situations.
Experience the perfect blend of performance, protection, and style with the PACR waterproof winter road bike shoe covers, designed to enhance your winter riding experience through functionality and uncompromising performance. Compatible only with road bike shoes.
8. GripGrab Explorer Waterproof Gravel Overshoes
The versatile Explorer overshoes are primarily designed for gravel biking – ideal for ambitious riders who prefer drop handlebars and seek adventure off the paved roads. These off-road overshoes are an evolution of the popular Flandrien Waterproof Road Shoe Covers. They feature the same three-layer, waterproof, and soft knit construction but are even more durable thanks to their TPU-reinforced toe caps and wear protection on the underside. They are perfect for bikers who enjoy leaving the beaten path. With these gravel overshoes, you are well-equipped for cold and wet autumn and winter days, as they provide not only excellent ventilation for your feet with their completely waterproof and breathable membrane but also keep them dry despite splashes and rain showers. The shaft design without a zipper and the soft knit fabric fit snugly around your gravel shoes: minimal material volume for maximum flexibility. Extend your riding pleasure and enjoy the adventure. Be a GripGrab Explorer.
9. GripGrab Primavera overshoes
Wear the GripGrab Primavera oversocks over your road cycling shoes to reduce wind chill and gain additional thermal insulation during cool spring or autumn rides. They are easy to put on and just as easy to wash. Another advantage is that your cycling shoes will stay spotless. The pair features two pre-cut openings in the sole for the cleats and heel.
10. GripGrab RaceThermo Hi-Vis Overshoe
The RaceThermo Hi-Vis is a fully wind- and waterproof insulating overshoe, ideal for cold and wet days on the road. Its high-visibility features enhance your safety when you're out in low-light conditions. Made from 4 mm waterproof neoprene, the RaceThermo is equipped with IntelliSeal, a technology that significantly improves both durability and water resistance.
The RaceThermo Hi-Vis rethinks the traditional way of putting on overshoes. This zip-free overshoe is worn before putting on the shoe, which offers several advantages:
- Improved ease of putting on and fit over the shoe
- Better fit across a wider range of shoes
- No zipper means no chafing and provides a more minimalist feel
- Enhanced waterproof properties on the top and back
Compatible with all common pedal systems.
Details:
- Loop for attaching a safety light
- Zip-free design
- High visibility
- Kevlar reinforcements
- Medium thermal insulation
Type: Overshoes
Size information: Size fits true to size
Sole cutout: for full sole
Fit: snug fit
Shoe material:
Features: windproof
Material layers: single-layer
Type of upper material: neoprene
Upper material: 80% rubber, 10% polyamide, 7% polyester, 3% polyurethane
Shoe features:
Type of closure system: none (slip-on)
Special features: reflective elements.
