Comprehensive complete package for micro models, shock flyers, and small gliders. With the built-in gyro stabilization, the set is suitable for small 3D models. It is perfect for beginners to make their first flight attempts with self-built models. The switchable gyro function supports all flight maneuvers through stability control and nearly eliminates wind influences. In gyro mode, for example, the model cannot be over-controlled; even with full deflections on the transmitter stick, climb, descent, and turning flight are limited to about 15°. If the function is deactivated (via a button on the transmitter), loops or rolls are also possible. An additional button on the transmitter serves as a rescue function to bring the model from an uncontrollable flight position to a stable, neutral flight position.

Features:

• Complete RTR package Mode 2 with 2.4GHz transmitter
• 5-channel receiver with gyro and motor control for brushed motors
• 2x micro servo + 2x micro servo on the receiver
• Y-cable Micro JST
• Battery 2S LiPo 300mAh JST
• USB charging cable
• Switchable gyro function 3D / 6G
• 5 fully proportional channels (throttle, altitude, rudder, 2x aileron)
• Rescue function
• Dual rate switchable (high and low, servo travel limitation)
• 2.4GHz system with approximately 100 - 150m range
• Failsafe (e.g., in case of range exceeding)
• LiPo safe shutdown soft (reduces power when the battery is weak)

Technical Data:

• Transmitter: 2.4GHz 6 channel
• Receiver board dimensions LxWxH: 32 x 25 x 18mm
• Weight: 10g
• Motor connection: for brushed motors with 2-pin Micro JST connector
• Extra servo dimensions LxWxH: 11 x 15 x 3mm
• Weight: 2g
• Torque approx. 150g
• Battery: 300mAh 2S 7.4V LxWxH: 40 x 14 x 10mm
• Weight: 16g

Delivery includes:

• 2.4GHz transmitter
• Receiver including gyro and 2 micro servos
• 2x extra micro servo
• Y-cable micro JST
• LiPo battery 300mAh 2S 7.4V JST
• USB charging cable

Additional required: 4x AA 1.5V batteries for transmitter.