Best Vq Models products in the RC aircrafts category
On this page you'll find a ranking of the best Vq Models products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Vq Models Piper L4 Military / 2400 mm
Most importantly, this is a large model with split wings. Therefore, despite a wingspan of 2.4 meters, no transporter or bus is needed for transport to the model airfield.
The original Piper Cub was built about 20,000 times between 1938 and 1947.
Our Piper L4 is designed for 20cc class gasoline engines, but a suitable electric drive can also be installed. The attention to detail is highlighted by numerous scale features such as opening doors, prepared model lighting – not to mention the detailed cockpit.
Product description
- ARF ready-to-fly model made of wood construction (laser-cut)
- Finished with printed, highly detailed film covering
- Pre-painted fiberglass engine cowl
- Functional flaps
- Spring-loaded landing gear
- Small parts, accessories, illustrated instructions.
2. Vq Models Focke Wulf Dora
The Focke Wulf Fw 190 D (nickname "the Butcher Bird" or "Long Nose Dora") is originally a German WWII fighter aircraft. The machine, developed by Focke-Wulf in Bremen under the leadership of Kurt Tank, was used by the Luftwaffe from the early 1940s as a second standard fighter alongside the Messerschmitt Bf 109. The model is designed for modern brushless electric drives but can also be equipped with a combustion engine, such as the NGH GT-9 gasoline engine.
Product Features
* ARF ready-to-fly model in wooden construction (laser-cut)
* Pre-covered as shown
* Ideal for electric drives (combustion engine optional)
* Fixed landing gear (retractable landing gear optional)
* Accessories for R/C installation
* Detailed, illustrated instructions
Technical Data
Wingspan: 1500 mm
Length: 1014 mm
Takeoff weight: approx. 3000 g.
3. Vq Models Piper PA-38 Tomahawk / 1900mm ARF
The Tomahawk is a single-engine, cantilever low-wing aircraft with a T-tail and a closed cabin for two people. It features a fixed tricycle landing gear and is powered by a Lycoming O-235 four-cylinder piston engine with a two-blade propeller. The aircraft was produced from 1977 to 1982, with a total of 2,484 units built.
VQ Models has created a beautiful 1:5 scale model version of the PA-38 Tomahawk. The model is designed for electric drives but can also be easily equipped with a combustion engine.
Product Features
* ARF ready-to-fly model in wooden construction (laser-cut)
* Fully covered as shown
* Functional flaps
* Hand-painted pilot figure
* Many scale details
* Sturdy tricycle landing gear including steerable nose gear
* Accessories for R/C installation
* Detailed, illustrated instructions
Technical Data
Wingspan: 1900 mm
Length: 1200 mm
Takeoff weight: 3.7 - 4.1 kg
R/C: 8 channels / 8 servos.
4. Vq Models pilatus pc-7 austria arf
The Pilatus PC-7 is originally a two-seat training aircraft equipped with a turboprop engine. The model depicted here has been lovingly detailed and impresses with its authentic appearance. It has been specifically designed for electric drives but can also be equipped with a combustion engine upon request. Features: ARF ready-to-fly model in lightweight wooden construction, fully covered with printed film, pre-cut and painted fiberglass engine cowl, low-wing design with non-critical flight characteristics, fully aerobatic, rigid tricycle landing gear, electric retractable landing gear available as optional accessory.
5. Vq Models SPITFIRE 1.54M WARBIRD
The Supermarine Spitfire is originally a British fighter aircraft. It was used during World War II by the Royal Air Force and the Allied air forces. Due to its excellent maneuverability, the Spitfire was very popular among pilots and became one of the most produced aircraft types with over 20,000 units built. Translated into German, the name Spitfire means "fire-spitter" or "hothead."
The model of the Spitfire we offer is equipped with beautiful, loving details and impresses with the same agile flying characteristics as the original.
Brief description
* ARF ready-to-fly model in lightweight wooden construction (laser-cut)
* Ready covered as shown
* Pre-cut and painted fiberglass engine cowling
* Includes accessories such as wheels, linkages, etc.
* Well-illustrated manual.
6. Vq Models Junkers JU 52
The Junkers JU 52 is affectionately known as "Aunt JU" and originates from the Junkers Flugzeugwerke AG in Dessau. Originally designed as a cargo aircraft, the JU 52 was later predominantly used as a passenger plane. Characteristic of the aircraft are its three engines and the corrugated metal skin. The JU 52 model can be equipped with either one large engine or three smaller ones. In the version with just one engine, the two outer propellers rotate freely.
In 2016, the Junkers JU 52 was awarded "Model of the Year" in the Electric Flight category by the magazine FlugModell.
Features:
- ARF ready-to-fly model in lightweight wooden construction
- Pre-covered with printed film
- Outstanding flight characteristics
- Ideal for electric propulsion
- Sturdy landing gear.
7. Vq Models Super Cub "Burda" ARF 1.62m
Special attention was given to achieving the most authentic representation in the development of this Piper Super Cub. The result is a beautiful Piper Super Cub that impresses particularly with its excellent flight characteristics. The model is perfectly suited for electric propulsion, but it can also accommodate a combustion engine with approximately 7.5 - 11 cc displacement. The Piper Super Cub features many other innovative characteristics. On the right side of the fuselage, there is a large, double-opening (magnetic) door design for easy access, for example, for battery changes. The standard landing gear has been modeled after the original. If the model is to be flown on unpaved runways, larger wheels (without wheel pants) can be mounted at any time. The model is also very well suited for water flying or winter flying on snow; suitable floats can be found in our range.
Product Features
- ARF ready-to-fly model in wooden construction (laser-cut)
- Covered with printed, highly detailed film
- Two-part removable wing with aluminum tube connection
- Cabin glazing completely installed at the factory
- Fiberglass engine cowl, pre-painted
- Sturdy aluminum landing gear
- Hand-painted pilot seats
- Accessories, small parts, illustrated instructions
Technical Data
- Wingspan = 1620 mm
- Length = 1150 mm
- Weight = 2600 g (takeoff weight including battery)
- R/C functions = rudder, elevator, ailerons, and throttle.
8. Vq Models Tiger Moth DH.82 (yellow/silver) / 1400 mm
The de Havilland DH.82 Tiger Moth is a single-engine biplane trainer aircraft that had its first flight in 1931. This aircraft was designed by Geoffrey de Havilland. The Tiger Moth was used as a training aircraft by the British Royal Air Force. Towards the end of its operational period around 1950, many DH.82s were used for civilian purposes. Many of these still fly today at veteran meetings. The model has been lovingly replicated from the original and features very gentle flying characteristics. Our Tiger Moth has been developed from the ground up for electric drives. The large, removable cockpit allows for easy battery changes and maintenance. Due to its compact size, the model can be transported assembled in most cars without the need to dismantle the wings.
Product Features
- ARF ready-to-fly model in wooden construction (laser-cut)
- Fully covered as shown
- Fiberglass engine cowling, pre-painted
- Sturdy landing gear
- Hand-painted pilot figure
- Accessories for R/C installation
- Detailed, illustrated instructions.
9. Vq Models Piper Navy Cub / 2400 mm
The Piper Navy Cub is a special version of the J3 Cub that was manufactured for the US Navy. Characteristic of this aircraft type is its narrow fuselage. The pilot and passenger sit in tandem.
This model of the Piper Navy Cub impresses with very nice scale details and high-quality construction. Many parts are produced using 3D printing and hand-painted. The Piper Navy Cub can be equipped with either an electric motor or a combustion engine.
A large side door allows easy access to the R/C system and the flight battery or fuel tank.
As this aircraft seamlessly fits between a yellow J3 and the L4 Grasshopper, this Piper Navy Cub is also highly recommended for collectors and enthusiasts.
Great flying characteristics and a stunning flight appearance also define this model from our range.
Product description
- ARF ready-to-fly model (laser-cut)
- Covered as shown
- Two-piece wings with a joiner
- Sturdy landing gear
- Ideal for electric and combustion engine propulsion.
10. Vq Models Piper Pa-18 Super Cub Arf 1.6m In Wood Construction
Particular attention was paid to detail fidelity in the development of this Piper PA 18. The result is a beautiful Piper that impresses especially with its excellent flight characteristics. The model is perfectly suited for electric propulsion, but it can also be equipped with a combustion engine with a displacement of approximately 7.5 - 11.0 cc. The Piper PA 18 features many innovative characteristics. On the fuselage side, there is a large, double-hinged (magnetic) door construction for easy access (e.g., battery changes). The standard landing gear is modeled after the original. If the model is to be flown on unpaved runways, larger wheels can be mounted at any time. The model is also very well suited for water flying or winter flying on snow. Suitable floats can be found in our range.
Product features:
- ARF ready-to-fly model in lightweight wooden construction (laser-cut)
- Very extensively pre-fabricated (short assembly time)
- Reinforced fuselage bottom for the installation of floats
- Pre-covered with printed film
- Two-part wing with a stable aluminum tube connection
- Pre-machined and painted engine cowling
- High-wing design with gentle, completely non-critical flight characteristics
- Capable of aerobatics
- Sturdy landing gear
- Includes accessories such as wheels, linkages, etc.
- Detailed, illustrated instructions.
