Best RØDE products in the Microphone accessories category
On this page you'll find a ranking of the best RØDE products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. RØDE Interview GO Hand Holder
By inserting the transmitter module of the Wireless GO wireless system into the corresponding slot on the Interview GO and equipping it with the included foam windscreen, you get an elegantly designed wireless interview microphone with excellent voice transmission. The range of the Wireless GO system is more than sufficient at 70 meters.
2. RØDE Wireless Go II Charging Case
Elegant, robust, 10 cm wide zippered case covered in textured synthetic leather for the three modules of the RØDE Wireless GO II wireless microphone system (2x transmitters TX and 1x receiver RX).
The battery capacity is 4500 mAh, allowing for two complete charges of the modules. On the back of the case, there is a USB-C port and next to it a charging status LED with a test button. There are slots for 2x transmitters (TX) and 1x receiver (RX). Battery capacity: 4200 mAh. Allows for two complete charges of all three modules. Input: USB-C, 5V DC/3A. Charging status LED with test button.
3. RØDE Wireless GO II TX
Compact module (4 x 4 cm) that allows the Wireless GO II Single System to be expanded with a second transmitter - ideal for interviews. The integrated miniature condenser microphone delivers crystal-clear audio quality. An external microphone can also be connected to the 3.5 mm TRS socket, with the Wireless GO II TX functioning purely as a transmitter. The built-in audio memory in the module allows for up to 40 hours of onboard recording for backup purposes.
The wireless transmission occurs over the license-free and registration-free 2.4 GHz band, with a range of 200 m in clear line of sight. The internal LiPo battery provides power for at least 5 hours. Charging, configuration, firmware updates, and backup transfer are done via USB-C. The package includes two furry windshields for outdoor recordings (one as a spare) and a 30 cm USB-C to UBC cable. The manufacturing of the Wireless GO II TX takes place in RØDE's precision facility in Sydney, Australia.
4. RØDE MagClip GO
The clothing can be clamped between the magnet and clip for maximum flexibility. The MagClip GO can even be used to discreetly place the microphone on an object, in a scene, or on stage to capture dialogues.
5. RØDE SC22
High-quality, 30 cm long and well-shielded Hi-Speed USB cable. The SC22 allows you to connect the VideoMic NTG, VideoMic GO II, or Wireless GO II to the USB-C port of a smartphone or computer, elegantly bypassing their preamp/converter section for better audio quality. The SC22 is also suitable for the NT-USB Mini, RØDECaster Pro, and AI-1.
Especially convenient: With the VideoMic NTG and VideoMic GO II, the 3.5 mm jack can be used as a headphone output. This saves you the hassle of unplugging and replugging when you want to listen to a recording on your smartphone.
High-quality and well-shielded cable. Hi-Speed USB certified. For connecting to smartphones or computers with USB-C ports. For digital audio transmission. Compatible with VideoMic NTG, VideoMic GO II, Wireless GO II. Also suitable for NT-USB Mini, RØDECaster Pro, AI-1.
6. RØDE Sm4-R
The SM4-R is an elastic mount for microphone stands and boom poles. It features two Rycote Lyre mounts for maximum isolation. Four possible attachment points make it compatible with the entire range of Rode directional microphones. A cable management clip is integrated.
7. RØDE Vxlr+
Rode VXLR+ XLR TRS Mini Jack Adapter Model: VXLR+ integrated voltage converter. Reduces voltage from 12-48V to 3-5V Plug-in Power. XLR3M to 3.5mm TRS mini jack (with thread for connecting an HS2 headset) enables the operation of HS2, Videomic Go, Videomicro on professional XLR microphone inputs with phantom power. With belt clip. Length: 66mm. Weight: 60g.
The Rode VXLR+ XLR adapter regulates phantom power (12-48V) down to plug-in power (3-5V) using an integrated voltage converter, allowing the connection of small microphones to professional XLR inputs with phantom power. For small microphones like the Videomic GO, Videomicro, or HS2 headset, the voltage of 12-48V is too high, and the microphones could be damaged when attempting to operate them via a professional XLR connection. With the VXLR+, these microphones can be easily connected to a professional mixer or to an XLR input of a video camera. The 3.5mm mini jack features a thread that fits the Rode HS2 headset, preventing accidental disconnection of the cable.
Included: 1x Rode VXLR+.
8. RØDE SC16 USB-C cable
The SC16 is a high-quality USB-C to USB-C cable designed to connect RØDE microphones with a USB-C output to USB-C compatible devices. With a length of 300 mm, the cable is ultra-flexible, allowing you to easily attach it to your devices. It also features a built-in cable grip that is compatible with the shock-absorbing VideoMic NTG cable management system. It is particularly suited for connecting the VideoMic NTG to mobile USB-C devices, but can also be used with all RØDE devices that have a USB-C output, including the NT-USB Mini, Wireless GO, and RØDECaster Pro.
9. RØDE NT45-C
The RØDE NT45-C is a high-quality small diaphragm interchangeable capsule specifically designed for use with various RØDE microphones. This capsule offers precise sound reproduction and is ideal for professional applications in music and audio production. With its robust construction and ease of use, the NT45-C is a reliable choice for sound engineers and musicians. The capsule is compatible with the microphone models NT4, NT5, NT55, and NT6, making it a versatile accessory for different recording needs. Its compact dimensions and lightweight design also make it easy to transport and integrate.
- Compatible with RØDE microphones NT4, NT5, NT55, and NT6
- Robust construction for professional applications
- Lightweight and compact for easy handling and transport.
10. RØDE LAV clip - set of 3
Rode Lav-Clip clips for lavalier microphones, set of 3. Microphone mounting clips for Rode lavalier microphones to attach a lavalier microphone to clothing. Ensures optimal microphone alignment and provides a discreet appearance. The Rode Lav-Clip is designed for securing Rode lavalier microphones. This set includes 3 Lav-Clip mounting clips. Attach your lavalier microphone in the wire holder of the Lav-Clip to keep it fixed in the correct, aligned position. The clips provide reliable hold on your clothing and ensure optimal positioning of your lavalier microphone. The Lav-Clip is suitable for all Rode lavalier microphones. Note: Delivery does not include a microphone. Package includes: 3x Lav-Clip.
