Best Homematic IP products in the Smart home hubs category
On this page you'll find a ranking of the best Homematic IP products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Homematic IP Home Control Unit (HmIP-HCU1-A) (anthracite)
The future-proof central hub for everyone. From small smart homes to large, maximally expandable future solutions: all of this is made possible by the Home Control Unit. The most flexible Homematic IP central unit meets today’s and future demands for your individual smart home. The Homematic IP Home Control Unit is the central place for your smart home devices. You can integrate up to 120 wireless components as well as hundreds of wired devices through a connectable Wired Access Point. You can then comfortably control your entire smart home via the app – either through the cloud or locally, according to your preferences.
Installing the Homematic IP Home Control Unit is incredibly simple: first, connect the Homematic IP Home Control Unit to your router using the included network cable or easily use the Wi-Fi installation. Then, the Homematic IP app guides you step by step through the installation process. Done. The attractively designed Home Control Unit in white or anthracite stands stable on a solid surface. However, you can also mount the central unit on a wall using the included bracket.
Integrating your Homematic IP wireless components is also easy and quick via the app. Remote devices are reliably integrated into the system – thanks to the wireless range of up to 400 meters. If you want to integrate wired components, first connect a Homematic IP Wired Access Point. You can also use the CCU3 as a gateway to control existing CCU3 installations through the Home Control Unit or to automatically migrate Homematic IP devices.
Once set up, you can conveniently control, expand, modify, and monitor your entire smart home via the Homematic IP app and with voice commands through Amazon Alexa and Google Assistant – of course, even when you’re on the go.
2. Homematic IP Multi IO Box
Multi IO Box HmIP-MIOB. Can be used with up to four underfloor heating actuators even without a Homematic IP Access Point or Homematic Central CCU2. Switch between winter and summer operation (heating and cooling possible). Mold formation due to condensation on the pipes can be reliably prevented. Temperature limiter input to protect the floor. 0 to 10 V output. Home automation made easy with Homematic IP. Homematic IP offers a practical solution for almost all situations in home life: The home control system simplifies everyday tasks and takes care of recurring processes in the house, such as retracting the awning, closing the shutters, or opening the garage door. Control everything conveniently via the central unit, remote control, PC software, or smartphone. You have the option to combine different applications. Always expandable, always reliable. The Homematic system is flexibly expandable at any time. You can build your system piece by piece and customize it according to your personal preferences. Since the components communicate wirelessly with each other, no wiring is required. The use of state-of-the-art wireless technology offers you nearly one hundred percent availability of functions. Innovative smart home products from eQ-3. Homematic IP is a product of eQ-3 AG. Since the 1980s, the ELV/eQ-3 group has evolved from a technology pioneer to one of the European market leaders in the field of home control and is now one of the largest employers in East Frisia. eQ-3 stands for innovations across a wide range of technologies that, when combined, provide a competitive edge in consumer solutions.
3. Homematic IP Home Control Unit (HmIP-HCU1) (white/grey)
The future-proof central hub for everyone. From small smart homes to large, maximally expandable future solutions: all of this is made possible by the Home Control Unit. The most flexible Homematic IP central unit meets today's and future demands for your individual smart home. The Homematic IP Home Control Unit is the central place for your smart home devices. You can integrate up to 120 wireless components as well as hundreds of wired devices through a connectable Wired Access Point. You can then conveniently control your entire smart home via an app – either through the cloud or locally, according to your preferences.
Installing the Homematic IP Home Control Unit is incredibly simple: first, connect the Homematic IP Home Control Unit to your router using the supplied network cable or use the Wi-Fi installation. The Homematic IP app will then guide you step by step through the installation process. Done. The attractively designed Home Control Unit in white or anthracite stands securely on a solid surface. However, you can also mount the central unit on a wall using the included bracket.
Integrating your Homematic IP wireless components is also quick and easy via the app. Remote devices are reliably integrated into the system – thanks to a wireless range of up to 400 meters. If you want to integrate wired components as well, first connect a Homematic IP Wired Access Point. You can also use the CCU3 as a gateway to operate existing CCU3 installations through the Home Control Unit or to automatically migrate Homematic IP devices.
Once set up, you can conveniently control, expand, modify, and monitor your entire smart home via the Homematic IP app and with voice commands through Amazon Alexa and Google Assistant – of course, even when you're on the go.
4. Homematic IP Interface for gas meter (HmIP-ESI-GAS) (white)
Homematic IP Interface for Gas Meters
Keep track of your gas consumption comfortably – at any time. With the Homematic IP interface for gas meters, you are always informed about the gas consumption in your home. This interface allows you to monitor the energy consumption of your heating system and your hot water connection via the Homematic IP app, which displays the gas meter data both in real-time and retrospectively. It is also possible to use the measured values for smart scenarios.
Installation is done directly on the gas meter. Using a supplied adapter, the sensor of the interface is attached to the gas meter. The interface is then integrated into the smart home via the Homematic IP app – done!
Read gas consumption via smartphone
All recorded consumption data from the Homematic IP interface for gas meters is fully transferred to the Homematic IP app. This allows you to easily read the current and past gas consumption at any time. Tip: By continuously recording and storing the measurement data, gas consumption can also be visualized and analyzed retrospectively. This way, there are no surprises on your next energy bill.
Key features:
1. Captures the current gas consumption directly at the meter and forwards the data to the Homematic IP app. The stored measurement data allows for long-term retrospective monitoring of consumption.
2. Enables the triggering of smart scenarios when connected to a Homematic IP actuator.
3. Compatible with gas meters from manufacturers Elster (Kromschröder, Honeywell), Itron (Pipersberg, Actaris), and Metrix that are prepared for a pulse sensor.
4. Utilizes counting pulses generated by a magnet in the roller counter of the gas meter.
Smart home hubs
−8%
EUR98,54 was EUR107,04
Homematic IP Interface for gas meter (HmIP-ESI-GAS) (white)
5. Homematic IP Smart Home Access Point (HmIP-HAP-A) (anthracite)
The Homematic IP Access Point is the central element for the cloud-based, intuitive setup and control of the Homematic IP Smart Home system via the free Homematic IP app. The Access Point connects to a conventional router and links the Homematic IP Cloud located in Germany with the Homematic IP devices in your home – all fully encrypted. No registration or user account setup is required during installation. Once the Access Point is connected to the internet, all functions can be accessed via the free app. The intuitively usable app provides a clear overview of all conceivable functions. Adding new devices can also be done easily through the app with just a few steps. If desired, the Homematic IP system can also be conveniently controlled via voice commands (Amazon Alexa and Google Assistant). Thanks to a free field range of up to 400 meters, devices in distant corners can be reliably integrated into the system. The innovative IP radio protocol communicates extremely energy-efficiently on the 868 MHz/869.525 MHz frequency. This results in long battery life for the connected devices, and users are not exposed to continuous radio radiation. The high efficiency is also evident in the energy consumption of the Access Point, which has an average power consumption of 1.1 watts, ensuring no surprises on the electricity bill. Despite its low energy consumption, the base also visually provides users with necessary status updates at all times. For this purpose, the button on the front of the Access Point lights up in different colors depending on the operating condition. The Homematic IP Access Point can be operated lying flat on a table or securely mounted on the wall. Suitable screws and plugs, as well as the necessary network cable for connecting to the router, are of course included.
6. Homematic IP Interface for smart meters (HmIP-ESI-IEC) (white)
Homematic IP interface for smart meters allows you to monitor electricity consumption via an app and smartly utilize the data. With a glance at your smartphone, you are always informed about the electricity usage in your home. The Homematic IP interface for smart meters displays the data from the electricity meter both in real-time and retrospectively. It is also possible to use the measured values for smart automations.
The interface is installed directly on the electricity meter. Electronic electricity meters have an optical data interface embedded in a metal plate. The Homematic IP interface is magnetically fixed and then integrated into the smart home via the Homematic IP app.
You can conveniently read the electricity consumption via your smartphone. All data collected by the Homematic IP interface for smart meters is immediately forwarded to the Homematic IP app. This way, you can easily view both current and past electricity consumption at any time. All meter readings and the current power are transmitted.
A special highlight is the continuous measurement of power values, which can trigger various smart scenarios. For example, if electricity is fed in from a PV system, the Homematic IP interface for smart meters recognizes this. With a connected Homematic IP actuator, this produced electricity can then be effectively utilized.
A tip: By continuously capturing and storing the measurement data, consumption can also be visualized and analyzed retrospectively, ensuring there are no surprises with your next electricity bill.
Key features:
1. Captures current electricity consumption directly at the meter and forwards the data to the Homematic IP app. By storing the measurement data, consumption can also be monitored retrospectively over the long term.
7. Homematic IP Radio gateway HmIP-P-DRG-DALI
The Homematic IP DALI Gateway for DIN rail mounting reliably controls DALI lights directly from the distribution cabinet and intelligently integrates them into the Homematic IP Smart Home System. With a DALI Gateway, up to 32 DALI lights – such as fluorescent lamps, discharge lamps, low-voltage halogen lamps, dimmers for incandescent lamps, conversion to DC (0-10V), LED modules, switching functions, as well as color and color temperature control – can be perfectly dimmed and switched. The DALI Gateway can be easily retrofitted into an existing installation with DALI lights and fits neatly into the distribution cabinet. Already installed Homematic IP buttons and switches can be reused and integrated without any issues. After installation, DALI lights can be searched for and assigned within the Gateway. Control of up to 16 light groups is possible. The lights can be switched and dimmed with many Homematic IP devices, such as a Homematic IP remote control. Through the free Homematic IP app, the DALI lights in the Smart Home can also be conveniently operated from a smartphone. Installation is done on standard DIN rails in house and sub-distributions. The spring-loaded terminals allow for easy connection of DALI lights to both rigid and flexible cables. The large illuminated LC display of the Gateway allows for direct control and testing of the DALI lights without the need for programming, immediately after connection to the bus. Setup can be done via the free smartphone app with no-cost cloud service through the Homematic IP Access Point or with the locally operated CCU3 central unit. Alternatively, integration via numerous partner solutions is possible.