Best Phobya products in the Water cooling connection accessories category

On this page you'll find a ranking of the best Phobya products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. Phobya Flexible Thread Funnel Black G 1/4

The advantages compared to a household funnel are simple, but still predominant: The funnel cannot slip away, the lower bar is very short due to the thread and also the funnel side with the soft rubber is practical to use this tool at all in narrow places.

The bottom line is that you can say with a clear conscience: This funnel belongs in every well-assorted water cooling toolbox! 

2. Phobya Extension G1/4 to G1/4 knurled MSV

The extension from G1/4" external thread to G1/4" internal thread is designed to extend the threaded connection, allowing angled connections to be used more universally. The hose can be directed in the same direction since the angled connections are now aligned vertically. Technical details: Color: nickel-plated brass, length without thread: 10.7 mm, thread length: 4 mm. Delivery includes: 1x extension G1/4 to G1/4 nickel-plated knurled - MSV. Note: This knurled adapter is supplied with a seal. 

3. Phobya G1/4' Pressure relief valve MSV

This pressure relief valve can be easily screwed into a T-piece and mounted at any point in the circuit. Some expansion tanks offer multiple openings where standard closure caps are used; here, the valve can be installed. The 1/4" threaded connection is very short, only 4 mm, allowing for many other mounting locations in your water cooling system. The low overall height of the valve, without the thread measuring 16 mm, also supports its versatile application. The gasket attached to the bottom provides additional security to keep your system sealed. The valve allows for the release of excess pressure from 0.3-0.4 kg/cm² at 4.3-5.7 psi. 

4. Phobya Noise Destructor V.1 for pump decoupling

The variety of mounting options is a completely new development step from the company Phobya. The two solid mats are covered with adhesive tape on both sides. For easy decoupling, simply peel off all four protective films, stick everything together, and the decoupling is complete. As an alternative, if you often travel with your case, you can also securely screw the Phobya Noise Destructor in place. A hole has been pre-drilled for almost every pump. With item 52010 from our range, the pump is additionally secured with screws, and another noise-absorbing element has been integrated. These holes can also be used for the underside to securely screw the opposite side.

Pump compatibility (pre-drilled mounting holes):
including Laing DDC, Laing D5, Eheim 1046 (HPPS, Aquastream, Watercool 12V), Eheim 1048, Magicool 12V, Phobya DC 260 & DC 400, EK-DCP 2.2 & DCP 4.0.

We recommend ordering useful accessories such as item numbers 52010 or 52007 and/or suitable mounting screws and nuts.

This product has been tested for you:
Overclocking station. 

5. Phobya Radiator sealing tape 5mm for 120mm fan

This sealing tape is equipped with an adhesive on one side and is applied to the component of your choice. The fan can then be placed on the sealing tape with its outer edge. When the fan screws are tightened, the strip compresses to under 1 mm if necessary, compensating for any unevenness and gaps between the component and the fan. This prevents air from escaping, further enhancing the effectiveness of the fans.

The sealing tape has already been perfectly cut to fit the corresponding fan sizes, so it just needs to be stuck onto the radiator, and the fans can be securely screwed in place. 

6. Phobya Extension G1/4 to G1/4 rotatable silver nickel-plated

The extension from G1/4" external thread to G1/4" internal thread is designed to extend the threaded connection, allowing angled connections to be used more universally. The hose can be directed in the same direction since the angled connections are now aligned vertically.

Technical details:
Color: nickel-plated silver
Thread: 1/4" external to 1/4" internal
Thread length: 4 mm
Length: 20 mm

Delivery includes:
1x Phobya extension G1/4 to G1/4 swivel - nickel-plated silver. 

7. Phobya Hose clamp Allen 10-11.2mm

Hose clamp for securing hoses onto fittings that do not have a union nut.

The main advantage of hose fittings is that the taper is not as pronounced as with connections that have union nuts. The only drawback is that the hoses do not have additional support. However, there are now hose clamps with an internal hex screw! Easy to install, available in many colors, and visually very appealing!

Note: If you use the hose clamps with hose fittings, please be aware that the outer diameter of the hoses will increase by 1-2 mm, depending on the wall thickness. 

8. Phobya Hose clamp Allen 16-17mm

Note: If you are using the hose clamps with hose fittings, please be aware that the outer diameter of the hoses will increase by 1-2 mm, depending on the wall thickness.

9. Phobya Eheim 1046/48 inlet and 1250 outlet adapter to G1/4' gerä

With the G 1/4" adapter for the Eheim 1046/48, it is possible to use connections with G1/4" external threads. The adapter is simply screwed onto the front of the pump and can be used when a buffer tank is not required. It features an O-ring seal. Technical details: Material: brass, gold-plated; Thread size: 1/4 inch. Delivery includes: knurled pump adapter with a durable sealing ring. Please note: Do not screw in the adapter "dry," as this may twist the O-ring and cause leaks. Therefore, moisten the O-ring before screwing it in to avoid any issues. Note: Over-tightening the pump adapter can lead to breaking the plastic casing. The seal is already ensured by placing the O-ring and applying a light hand-tightening motion. 

10. Phobya Balancer replacement Plexi Tube 113mm (for 150)

In case of wear, scratches, or damage, the entire container no longer needs to be replaced. If the container has become "too small" (e.g., if the system has been expanded), it is possible to replace the tube with a larger one or to extend the existing container using a pipe connector. Note: O-rings are not included in the delivery. 

See all products