Best selling Water cooling monitoring from Aqua Computer
On this page you'll find a ranking of the best Aqua Computer products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Aqua Computer Passive cooler for aquaero 6, black
Mounting this passive heat sink on an aquaero 6 increases the heat dissipation from the power components and thus increases the output power of the fan ducts. In addition, the water cooler for aquaero 5 (Art. 20023) can be mounted on the passive cooler for active cooling. The passive cooler is also suitable for simultaneous mounting with the Real Time Clock (Art. 70215), but additional mounting material is included with the passive cooler.
Scope of delivery:
Aluminium heat sink for aquaero 6, black anodized
thermal pad
fixing material
Compatible to:
aquaero 6 PRO
aquaero 6 XT
Note: The aquaero 6 and the water cooler are not included in the scope of delivery! If the water cooler is used without a second or narrower elevation (very old variant), washers must be used for installation.
2. Aqua Computer Connection cable for VISION flow sensor
Connection cable for connecting the flow sensor, compatible with control devices of the Vision series.
3. Aqua Computer Flow sensor high flow NEXT, OLED, 2x G1/4, RGBpx
Precise inline flow sensor with a magnetic measurement system and temperature sensor. It measures coolant quality and features RGB lighting as well as an RGBpx output. The sensor has two G1/4 inch threads and is suitable for systems with a flow rate of approximately 35 l/h to 1,000 l/h.
4. Aqua Computer 53026 Indoor Temperature Sensor Wired Temperature & Humidity Sensor
This temperature sensor features an extremely flat design that allows for easy attachment to any surface that needs to be measured. The sensor is equipped with a two-pole connector, and the total length, including the sensor and connector, is approximately 70 cm.
Water cooling monitoring
Quantity discount
EUR8,52 per piece for 2 units
Aqua Computer 53026 Indoor Temperature Sensor Wired Temperature & Humidity Sensor
5. Aqua Computer Aquacomputer connection cable alarm output VISION/OCTO to mainboard power button
This cable from Aquacomputer is used for emergency shutdown of the computer in the event of an alarm. It is compatible with the Vision series and is connected to the power button input of the mainboard without affecting the power button. Scope of delivery: 1x cable (length 70cm) Compatible with the following devices: cuplex kryos NEXT with VISION VISION connection terminal for kryographics (23664, 23665, 23666, 23667) VISION Touch (53232, 53235) OCTO (53286) Note: Before connecting the cable, please make sure that the alarm output/tacho signal output of the corresponding device is configured correctly! Quick guide: Settings for VISION devices (in aquasuite software): Tab "Alarm settings": Selection item "Power button (53216)" must be activated. Only then connect the alarm cable to the mainboard. Then test the correct function by provoking an alarm. If the PC does not switch off, turn the plug on the mainboard 180 degrees and repeat the test. During the emergency shutdown, data may be lost because the operating system and open programmes will not be shut down properly! be terminated properly!
Water cooling monitoring
Quantity discount
EUR8,47 per piece for 2 units
Aqua Computer Aquacomputer connection cable alarm output VISION/OCTO to mainboard power button
6. Aqua Computer USB connection cable for VISION, internal
With this USB connection cable, a USB device from Aqua Computer (e.g., VISION) that features a miniature connector can be connected to a free internal USB port (header) on the motherboard. The cable is 100 cm long and comes in a discreet black color, making it very easy to install.
Technical details:
- Color: Black
- Length: 100 cm
- Connectors:
- Miniature connector (USB device from Aqua Computer)
- USB connector (for internal header of a motherboard).
Water cooling monitoring
Quantity discount
EUR7,72 per piece for 2 units
Aqua Computer USB connection cable for VISION, internal
7. Aqua Computer aquaero power connect 24 pin ATX standby power ATX brea
Note: A connector for the relay output is additionally required for use with the switch output of the aquaero.
Water cooling monitoring
Quantity discount
EUR12,47 per piece for 2 units
Aqua Computer aquaero power connect 24 pin ATX standby power ATX brea
8. Aqua Computer poweradjust o. powerbooster connection cable for Laing DDC-Pu
Adapter cable used to connect a Laing D5 or DDC pump with a 4 pin power supply plug (or any other device with a 4 pin plug) to a suitable 3 pin fan header. Make sure the fan header is designed to provide enough power.
Water cooling monitoring
Quantity discount
EUR7,64 per piece for 2 units
Aqua Computer poweradjust o. powerbooster connection cable for Laing DDC-Pu
9. Aqua Computer USB cable (type-A) to miniature plug VISION
With this USB connection cable, a USB device from aqua computer (e.g., VISION) that features a miniature connector can be connected to a standardized USB Type A port. The cable is a total of 200 cm long and comes in a discreet black color, making it very easy to install.
Technical details:
- Color: Black
- Length: 200 cm
- Connectors:
- Miniature connector (USB device from aqua computer)
- USB Type A connector.
10. Aqua Computer Flow sensor high flow 2, 2x G1/4
The Aqua Computer High Flow 2 flow sensor can be easily integrated into the cooling circuit and allows for continuous flow measurement. This flow sensor is additionally equipped with a temperature sensor to monitor the coolant temperature. The flow measurement is conducted via a rotor/impeller driven by the flowing coolant. The rotational speed is detected contactlessly through a magnetic measurement system. An optimally calibrated bearing play for each sensor minimizes operational noise. The sensor provides reliable measurements from approximately 35 l/h to 1000 l/h, making it ideal for most water cooling systems. Its symmetrical design allows for integration into the system without regard to flow direction. Additionally, the sensor can be operated in any installation position. The very low flow resistance meets the demands of high flow systems. The High Flow 2 has significantly more compact dimensions than its predecessor. Housed in an aesthetically pleasing acetal casing, it integrates not only the flow sensor but also a very accurate and fast water temperature sensor. The stainless steel cover of the sensor is magnetically attached without screws. The connection threads are made in G1/4, allowing operation with a wide range of hose systems. For mounting the sensor, three M3 threads are integrated into the base, with matching screws included in the package. Technical specifications: Dimensions: approximately 51 x 41 x 31 mm, connection thread G 1/4. A device with a flow sensor input is required to evaluate the flow signal, which is not included! Package contents: One flow sensor, one connection cable, three screws M3 x 6 mm.
Product order
See all products