Thermal grease
Quantity discount
EUR8,27 per piece for 2 units EUR8270,–/1kg
Thermal Grizzly Kryonaut
12.50 W/m K, 1 g
Top rated Thermal grease
Here's a ranking of the top rated products in this category. To give you a quick overview, we've also added some key information about the products.
1. Thermal Grizzly Kryonaut
The Kryonaut thermal paste is ideally suited for low-temperature cooling applications such as nitrogen or compressor cooling. However, it also works excellently between a CPU and an air or water cooler. Embedded in a carrier structure are aluminum and tin oxide components that optimally compensate for unevenness on the surfaces of the heat source and the heat sink while providing outstanding thermal conductivity. Unlike many competing products, Kryonaut does not begin to dry out even at 80 °C.
2. Thermal Grizzly Cryonaut
The Kryonaut thermal paste is ideally suited for low-temperature cooling applications such as nitrogen or compressor cooling. However, it also works just as well between a CPU and an air or water cooler. Embedded in a carrier structure are aluminum and tin oxide components that optimally compensate for unevenness on the surfaces of the heat source and the heat sink while providing outstanding thermal conductivity. Unlike many competing products, the Kryonaut does not begin to dry out even at 80 °C.
3. Thermal Grizzly Heat-conducting paste Kryonaut 10 ml
The Kryonaut thermal paste has been specifically developed for extremely demanding applications and the high requirements of the overclocking community. Kryonaut is also an excellent choice for critical cooling systems in the industrial sector. Kryonaut utilizes a special carrier structure that prevents drying processes even at temperatures of 80 °C. This carrier structure ensures that the included nano-aluminum and zinc oxide components of the paste bond optimally, effectively compensating for any unevenness in the heat spreader (e.g., the CPU) and a heat sink (e.g., cooler) while providing outstanding thermal conductivity.
Thermal grease
EUR92,63 EUR2503,51/1kg
Thermal Grizzly Heat-conducting paste Kryonaut 10 ml
12.50 W/m K, 37 g
4. Arctic Silver Thermopaste silver 5 (3.5g)
For better heat transfer between the processor and the fan. Should be used with all processors and fans, unless the fans are equipped with thermal pads or other materials for special heat dissipation. The paste contains silver particles that conduct heat very well. The silver particle content is approximately 99.9%. 3.5 grams is sufficient for about 20 applications. Min. 9.0 W/m°K.
5. Arctic Silver Sidabrinis AS5, 12g heat sink compound Thermal compound 350000 W
It should be used with all processors and fans, unless the fans are equipped with thermal pads or other materials for special heat dissipation. The Paste Silver 5 contains silver particles that conduct heat very well. The silver particle content is approximately 99.9%.
Thermal grease
EUR45,90 EUR3825,–/1kg
Arctic Silver Sidabrinis AS5, 12g heat sink compound Thermal compound 350000 W
9 W/m K, 12 g
6. Arctic Mx-4
The Arctic MX-4 is a thermal paste that offers exceptional heat transfer from components to coolers. Like its well-known predecessors in the Arctic MX series, the Arctic MX-4 is specifically designed for overclockers. The MX-4 is very easy to apply. Its new consistency makes it a breeze to apply cleanly on the chip, even with a finger. The electrically non-conductive paste is placed between the CPU/GPU and the corresponding coolers to optimize heat transfer from the chip to the cooler. Since the Arctic MX-4 is metal-free, it eliminates the risk of short circuits, thereby providing increased safety for the computer.
Thermal grease
Quantity discount
EUR5,54 per piece for 2 units EUR1385,–/1kg
Arctic Mx-4
8.50 W/m K, 4 g
7. Arctic Thermal compound MX-4 4 gr.with spatula
The surfaces of processor chips and cooler bases are characterized by microscopic irregularities. The Arctic MX-4 thermal paste is made from carbon microparticles that fill these gaps, resulting in extremely high thermal conductivity. This ensures that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is an excellent choice for overclockers and enthusiasts, as well as for other applications where thermal transfer is required.
Thermal grease
Quantity discount
EUR5,30 per piece for 2 units EUR1325,–/1kg
Arctic Thermal compound MX-4 4 gr.with spatula
8.50 W/m K, 4 g
8. Arctic MX-4 2019 Edition Thermal Paste
The surfaces of processor chips and cooler bases are characterized by microscopic irregularities. The Arctic MX-4 thermal paste is made from carbon microparticles that fill these gaps, resulting in extremely high thermal conductivity. This allows heat to be dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is an excellent choice for overclockers and enthusiasts, as well as for other applications where thermal transfer is required.
9. Arctic Silver ArctiClean 30+30ml
Fighting with stubborn residues on the CPU or GPU cooler after replacing the CPU or graphics card is now a thing of the past. Often, the old thermal paste or thermal pad on the heatsink is so firmly dried that it can be incredibly frustrating. Many times, mom's nail polish remover had to come to the rescue. Stress was inevitable, and the results were not always satisfactory.
Arctic has addressed this issue and developed ArctiClean, a two-phase cleaner that easily and efficiently dissolves even the most stubborn thermal pads and thermal paste from CPUs and coolers, while the second phase prepares the surface for the application of new thermal material.
The thermal pad/paste remover ArctiClean 1 is a non-toxic, biodegradable solvent. The liquid is made from extracts of citrus fruits and soy. The scent can even be described as pleasant.
ArctiClean 2 is designed to prepare the surface cleaned with ArctiClean 1 (cooler, CPU, etc.) for new thermal paste and to remove any residues of ArctiClean 1 and/or other cleaning agents. This also helps to reduce the corrosion process of copper and aluminum.
Caution! Please read the manufacturer's warnings before use!
Contents of the package:
- 30 ml remover
- 30 ml preparation liquid.
10. Thermal Grizzly Conductonaut liquid metal
Overclockers, watch out. With the paste, the temperature of the processor can be lowered again by a few degrees without having to buy a new cooler. The application of the liquid metal is also surprisingly simple, especially as the manufacturer already includes the necessary accessories in the scope of delivery. If the use is still new at the first time, it goes at the latest from the second application quickly by the hand. Very good.
In addition, the Thermal Grizzly Conductonaut is extremely productive. The filling quantity of one gram of liquid metal is sufficient for far more than 10 applications. And if there is too much liquid metal on the processor, it can simply be sucked back into the syringe. The correct dosage is therefore very easy to handle. On average, half a grain of rice is sufficient for one processor.
Important: The Conductonaut must not be used with contact surfaces made of aluminium. Recommended materials are copper, nickel, silver and other metals. In addition, the Thermal Grizzly Conductonaut Heat Conducting Paste should be stored in its original packaging in dry rooms at room temperature.
