Mounting light fittings or tool racks on a rough and solid surfaces is easy with a tesa® Adhesive Screw Triangular for Brick & Stone 5 kg. They’re seriously tough, they’re removable and you can use them indoors or outside, too. You won’t even require any tools – everything you need is included.How to apply – Step by step 1. For an optimal bond, use a brush to clean away as much grit or dust as you can from the surface.2. Take off the protective foil from the adhesive foam tape and lightly press the adhesive screw to the surface. The tape is there only as a way to keep the screw in place while you apply the adhesive. The screw head should be aligned so that the body of the Adhesive Screw will be concealed behind the object.3. Using the key in the pack, pierce the nozzle on the tube of adhesive before sliding it over the other end. 4. With the nozzle poked into the bigger hole, squeeze the adhesive into the screw body by twisting the key. Continue until the adhesive starts coming out of the smaller hole and the cavity is filled evenly. Wait a full 12 hours for the adhesive to dry before you put any weight on it. Mount objects on rough, tough surfaces without a drillIt used to be difficult to get screws into tough surfaces like brickwork and stone. You had to buy or borrow a drill and make a lot of noise and mess. A tesa® Adhesive Screw means you can mount anything up to 5 kg - or 10 kg if you’re using two of them - inside or outside without any tools at all. And because of their triangular shape, they can be tucked away neatly behind whatever item you’re hanging.Easy to use – even simpler to removeTo remove the screw, take hold of it with a wrench and just twist it away from the surface.Please use the tesa® Product Finder if you want to mount objects on other surfaces like glass, wallpaper, plaster or tiles and browse our other tesa® Smart Mounting Solutions.Not suitable for any non-stick surfaces.