Compact LED downlight in a square design. Recessed downlight with a rim for cut ceiling openings. Tool-free ceiling installation via quick-mount springs. Square cut-out size 68 mm. Installation depth >= 80 mm, luminaire height 83 mm. With a white-coated plastic reflector. Color of the ceiling mounting frame: white. Symmetrical light distribution characteristic and half-value angle: 24° Medium Flood. Light control through collimator/lens technology. Limitation of direct glare according to UGR 19. Equipped with an LED module. Luminous flux of the luminaire 800 lm, connected load 11 W, luminous efficacy of the luminaire 73 lm/W. Light color warm white, closest color temperature (CCT) 3000 K, general color rendering index (CRI) Ra= 90. Color point tolerance (initial MacAdam) = 3 SDCM corresponds to a very high color consistency of the LED in application. Average lifespan L90(tq 25 °C) = 50,000 h, average lifespan L80(tq 25 °C) = 70,000 h. The light source is replaceable according to ecodesign requirements. Permissible ambient temperature (ta): -20°C - +25°C. Housing and heat sink made of aluminum die-cast. Protection class (EN 61140): II, protection rating (DIN EN 60529): IP20. Protection rating on the room side: IP54. Impact resistance grade according to IEC 62262: IK02/0.2 J, test temperature for the glow wire test according to IEC 60695-2-11: 850 °C. The mains connection of the ballast is made via a terminal block. With electronic ballast, digitally dimmable (DALI). Operating device according to DALI-2 standard. Luminaire can be switched and dimmed via touch function over DALI control terminals (Touch DIM). Possible dimming range: 1...100%. The operating device is replaceable according to ecodesign requirements. Live-Link ready. The luminaire meets the basic requirements of applicable EU directives and the Product Safety Act and bears the CE marking. Additionally, the luminaire is ENEC certified by an independent testing body.