Devi Heating Mat for Asphalt Installation DEVIasphalt 300#0614 Manufacturer :Devi Designation :Heating Mat f. Asphalteinbau 6,0qm, 1740W Type :DEVIasphalt 300#0614 With carrier mat :yes Fixation of heating conductor :Glued Self-adhesive :no Connected load :-1740 W Output :300 W/m² Heating conductor load :30 W/m Number of cold conductors :1 Length of cold conductors :30000 mm Suitable for damp rooms :yes Suitable as open area heating :yes Suitable as roof area heating :no Area :6 m² Length :6000 mm Width :1000 mm Thickness :8 mm With controller :no With room thermostat :no With floor temperature sensor :no Devi Heating Mat f. Asphalt installation DEVIasphalt 300#0614: more details Ready-to-install heating mat with a connection cable, suitable for embedding in asphalt pavements. The heating cable fulfils the requirements of IEC 60800 and EN 62395. With additional protective braiding for the use of the residual current circuit breaker. Including factory-fitted watertight sleeve and a 30 m long PTC resistor. Voltage: 400 V, nominal limit temperature: 90°C, installation temperature: 240°C for short periods, deformation resistance 2000 N, tensile strength: 120 N, heating conductor insulation: FEP, PTC resistor: 1 x 30 m 2.5 mm², specific heat output: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, smallest bending radius: 5 x dA, protection class: IP X7, surface: 6.0 m², 1.00 x 6.00 m, 1770 W , EAN: 5703466229187.