Danfoss Thin Bed Heating Mat 140F0458

Manufacturer: Danfoss
Designation: Thin Bed Heating Mat 150 W/m², 12 m²
Type: 140F0458
Design: Heating foil
With carrier mat: yes
Fixation of heating conductor: glued
Self-adhesive: yes
Connection power: 0 to 1800 W
Power: 150 W/m²
Heating conductor load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof surface heating: no
Area: 12 m²
Length: 24000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

Danfoss Thin Bed Heating Mat 140F0458: additional details
Thin bed heating mat with a connection cable and suitable sensor protection tube DN10 with a red cap. The self-adhesive thin bed heating mat with a connection cable is pre-assembled for installation and has been specifically designed for embedding in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as the return of the second connection is eliminated. The heating cable, with additional protective sheathing for the use of the RCD protection circuit, is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold lead: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating power: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10 % / -5 %, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area 12 m², 0.5 x 24.0 m.