Niedax Nail Anchor NA 6X5

Manufacturer: Niedax
Designation: Nail Anchor
Type: NA 6X5
Execution: Drive-in
Mounting Device: Other
Through-mounting: Yes
Pre-mounting: No
Max. Clamping Thickness: 5 mm
Suitable for Concrete: Yes
Material of Sleeve: Steel
Material Quality of Sleeve: Other
Surface Protection: Galvanized/Electrolytically Zinc Coated
Thread Type: Metric
Thread Size (Metric): 6
Drill Hole Diameter: 6 mm
Length: 45 mm
Min. Drill Hole Depth: 50 mm
Permissible Load Tension Zone: 1.4 kN
With Approval: Yes
Self-drilling: No

Niedax Nail Anchor NA 6X5: Additional Details
The nail anchor is an anchor designed for use in concrete for multiple fixings. It is inserted into a drill hole and expands under load. The nail anchor is suitable for through-mounting and is installed by lightly hammering on the nail head. Permissible loads apply for axial tension, lateral loads, and diagonal tension at any angle, as well as anchor values and component dimensions for concrete strength classes B 25 or C 20/25 and B 55 or C 50/60. When designing, the entire approval notice No. ETA-18/0541 must be observed. For outdoor use, we recommend nail anchors made of stainless steel. For use in functional maintenance or for ceilings with fire protection requirements (Sample Guidelines for Pipeline Systems MLAR 2/2015), additional regulations must be observed.

Application Area
The anchor may be used as a multiple fastening for securing lightweight ceiling coverings and suspended ceilings according to DIN 18168, as well as for statically comparable anchoring up to 1 kN/m², including in the tension zone generated by load stresses.

Technical Specifications
Total Length L: 42 mm
Nominal Drill Ø: 6 mm
Clamping Range t fix: 5 mm
Material: Steel, galvanized according to DIN EN ISO 2081/4042, blue passivated
Approval No.: ETA-18/0541
DoP NI001
EAN: 4013339158171.