The practical universal wooden dowel set from wolfcraft consists of a drilling guide, a board clamp, an 8 mm diameter wood drill with depth stop, and 40 wooden dowels. It is the perfect equipment for all surface, corner, and T-joint connections. With the handy board clamp and the drilling guide, you can secure the first board in the workbench. The second wooden board can be positioned using the two variable clamping blocks either horizontally or vertically. The drilling guide not only serves as a board clamp but also as a drilling template. With its double-layered 3-hole bushings for 6, 8, and 10 mm dowels, it allows you to create identical holes at exactly the same height. Additionally, there is a corresponding guiding groove for each of the three dowel sizes to help retrieve drilled dowels, enabling precise positioning of dowel holes in T-joints. The holes in the wooden surfaces should not be drilled deeper than two-thirds of the wood thickness, which is why the included depth stop is especially helpful for corner and T-joints. It allows for reliable adjustment of the drilling depth. This practical set is designed for clamping, drilling, and doweling without the need for measuring and marking. The set includes a drilling guide, a board clamp, an 8 mm wood spiral drill with depth stop, and 40 wooden dowels. Wooden doweler with 3-hole bushings for 6, 8, and 10 mm dowels. Variable clamping blocks for horizontal and vertical counter-clamping. Suitable for board thicknesses of 12–30 mm.