Screws
EUR22,90 EUR0,11/1pcs.
Reisser R2 Chipboard screws, flat countersunk head, PZ, full thread, 6.0 x 50, steel, galvanised, yellow
200 Screws per piece
Best Reisser products in the Screws category
On this page you'll find a ranking of the best Reisser products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Reisser R2 Chipboard screws, flat countersunk head, PZ, full thread, 6.0 x 50, steel, galvanised, yellow
The R2 chipboard screws from Reisser are specifically designed for applications in woodworking. These screws feature a flat countersunk head and full thread, ensuring optimal connection and stability. With a diameter of 6 mm and a length of 50 mm, they are versatile and offer high strength. The screws are made from high-quality steel and are electro-galvanized, which protects them from corrosion and enhances their durability. The ProziDrive cross recess allows for precise and secure handling during installation, while the break-resistant hardening provides additional safety. These screws are ideal for use in furniture construction, wood joints, and other applications where a reliable fastening is required.
- ProziDrive cross recess for precise installation
- Break-resistant hardened for increased safety
- Plastic-sintered surface for improved sliding properties
- Electro-galvanized for corrosion protection.
2. Reisser R2 Chipboard screws, flat countersunk head, PZ, partial thread, 6.0 x 70, steel, galvanised,
Chipboard screw
- with Prozidriv cross recess
- Hardened to resist tearing off
- plastic sintered
- electrogalvanised
zero.
Screws
EUR24,99 EUR0,25/1pcs.
Reisser R2 Chipboard screws, flat countersunk head, PZ, partial thread, 6.0 x 70, steel, galvanised,
100 Screws per piece
3. Reisser R2 plus chipboard screws, flat countersunk head, TX drive, partial thread, 4.5 x 45, steel
The R2 Plus chipboard screws from Reisser are specifically designed for applications in woodworking. These screws feature a flat countersunk head and an innovative TX drive that allows for optimal power transfer and easy insertion. With a partial thread and a length of 45 mm, they offer high flexibility and stability in various materials. The screws are made from hardened steel and have a yellow zinc-coated surface that provides additional corrosion protection. The sliding coating ensures effortless insertion and reduces wear. These features make the R2 Plus chipboard screws a reliable choice for professional craftsmen and DIY enthusiasts.
- Torx R2 Plus drive for improved power transfer
- Hardened steel for increased strength and durability
- Sliding coating for easy insertion
- Yellow zinc-coated surface for additional corrosion protection.
Screws
Quantity discount
EUR15,69 EUR0,07/1pcs.
Reisser R2 plus chipboard screws, flat countersunk head, TX drive, partial thread, 4.5 x 45, steel
200 Screws per piece
4. Reisser Chipboard screws PAN-HEAD galvanised 5.0 x 60 PZ, pack of 200 pieces
Pre-drilling may be necessary depending on the nature of the wood and the processing situation.
Areas of application: interior fittings, furniture construction, hardware parts.
Pan head with a flat bearing surface, high contact pressure, perfect fit, and beautiful appearance. Suitable for fittings and hardware. PZD magazine processing possible.
Screws
EUR29,90 EUR0,15/1pcs.
Reisser Chipboard screws PAN-HEAD galvanised 5.0 x 60 PZ, pack of 200 pieces
200 Screws per piece
5. Reisser RETINOX 2 plus chipboard screws, flat countersunk head, TX drive, partial thread, 5.0 x 70,
Chipboard screw
- TORX
- with EAN
- Stainless steel A2
- slide coated
- with TX star drive
- Flat head
zero.
Screws
EUR75,91 EUR0,38/1pcs.
Reisser RETINOX 2 plus chipboard screws, flat countersunk head, TX drive, partial thread, 5.0 x 70,
200 Screws per piece
6. Reisser R2 plus chipboard screws, flat countersunk head, TX, full thread, 4.5 x 35, steel, galvanised
The R2 Plus chipboard screws from Reisser are specifically designed for applications in woodworking. These screws feature a flat countersunk head and full thread, ensuring optimal power transmission and secure driving into various materials. The yellow zinc-plated surface not only provides an appealing look but also protects against corrosion and enhances the longevity of the screws. The hardened and sliding-coated design allows for effortless driving and reduces material wear. These screws are ideal for use in furniture construction, wood joints, and other applications where high strength and reliability are required.
- Torx R2 Plus drive for improved power transmission
- Hardened and sliding-coated surface for easy driving
- Full thread for optimal holding power in various materials
- Yellow zinc coating for additional corrosion protection
- Suitable for applications in furniture construction and wood joints.
Screws
Quantity discount
EUR13,88 EUR0,07/1pcs.
Reisser R2 plus chipboard screws, flat countersunk head, TX, full thread, 4.5 x 35, steel, galvanised
200 Screws per piece
7. Reisser Thin sheet metal screws 6x38mm RP-T2 - Sheet metal screws with seal E16, bi-metal
RP-T2 thin sheet screw with a hexagon head and pressed-on washer. Made from bimetal (stainless steel A2/steel), nickel strike, galvanized blue, and anti-friction coated.
Application: Used for fastening aluminum and steel profile sheets on aluminum and steel, as well as fastening aluminum standing seam brackets on steel substructures.
Instructions: Apply the screw with increased pressure and low speed (approximately 200 turns). The pressure can be reduced once the thread engages, and the speed can then be increased to approximately 1600 revolutions. Immediately before fitting the sealing washer, reduce the speed considerably and tighten the sealing washer until it compresses slightly.
Recommended tightening torque for steel substructures is approximately 3 Nm; for material thickness below 0.8 mm, use 1 Nm. For aluminum substructures, the recommended tightening torque is approximately 1 Nm; for material thickness below 0.8 mm, use 0.5 Nm.
Product benefits include high screw-in speed due to the double-start thread, bimetal construction, and almost chip-free processing.
Technical data:
- Material: Bimetal (stainless steel A2/steel)
- Material seal: Stainless steel A2/EPDM
- Processing speed: 1600 rpm
- Drilling capacity: 1 x 1.25/2 x 1.0 mm
- Maximum tightening torque: 3.0 Nm
- Drilling capacity for component 1: Steel 0.4 - 1.0 mm; Aluminum 0.5 - 1.0 mm
- Drilling capacity for component 2: Steel 0.4 - 1.25 mm; Aluminum 0.5 - 1.5 mm
- Fastening of standing seam brackets on steel: 0.75 - 1.25 mm
Note: Currently regulated according to abZ with future conversion to ETA 21/0306.
Approval: Z-14.1-4, Z-14.1-537 with annex: Z-14.1-4, Annex 3.306b/3.307b, Z-14.1-537, Annex 3.1.31/3.2.22, Z-14.4-668, ETA-21/0306, Annex 29.10/29.11/29.20/29.30.
Dimensions:
- d1: 6 mm
- L1: 37.5 mm
- Brand: REFABO
- Type: RP-T2
- Thread: Double-threaded sheet metal thread
- k: 5 mm
- Surface: Nickel strike
- Head diameter: 11.5 mm
- Head shape: Hexagon head with pressed-on disc
- Material: Bi-metal, A2/steel
- Length: 38 mm
- Wrench width: 8 mm
- Seal: E16
- Content specification: 100.
Screws
EUR84,77 EUR0,84/1pcs.
Reisser Thin sheet metal screws 6x38mm RP-T2 - Sheet metal screws with seal E16, bi-metal
100 Screws per piece
8. Reisser R2 plus chipboard screws, flat countersunk head, TX, full thread, 4.0 x 20, steel, galvanised
The R2 Plus chipboard screws from Reisser are specifically designed for applications in woodworking. These screws feature a flat countersunk head and full thread, ensuring optimal connection and stability. Made from hardened steel and coated with a yellow zinc finish, they provide not only high strength but also effective corrosion protection. The internal hexagon drive (TX) allows for precise and secure screwing, while the sliding coating facilitates handling and minimizes the risk of material tearing out. These screws are ideal for use in furniture construction, wood joints, and other applications where a reliable fastening is required.
- Internal hexagon drive (TX) for precise screwing
- Hardened steel for high strength
- Sliding coating to reduce material tearing out
- Yellow zinc finish for effective corrosion protection.
Screws
Quantity discount
EUR10,93 EUR10,93/1pcs.
Reisser R2 plus chipboard screws, flat countersunk head, TX, full thread, 4.0 x 20, steel, galvanised
1 Screws per piece
9. Reisser Chipboard screws PAN-HEAD galvanised 4.0 x 20 PZ, pack of 200 pieces
Pre-drilling may be necessary depending on the nature of the wood and the processing situation.
Areas of application: interior fittings, furniture construction, hardware parts.
Pan head with a flat bearing surface, high contact pressure, perfect fit, and beautiful appearance. Suitable for fittings and hardware. PZD magazine processing possible.
Screws
Quantity discount
EUR13,30 EUR0,06/1pcs.
Reisser Chipboard screws PAN-HEAD galvanised 4.0 x 20 PZ, pack of 200 pieces
200 Screws per piece
10. Reisser R2 Chipboard screws, flat countersunk head, PZ, partial thread, 6.0 x 90, steel, galvanised
The R2 chipboard screws from Reisser are specifically designed for applications in woodworking. These screws feature a flat countersunk head and partial threading, ensuring optimal connection and stability. With a diameter of 6 mm and a length of 90 mm, they offer versatile uses in various materials. The screws are made from high-quality steel and are galvanically coated, protecting them from corrosion and enhancing their durability. The Pozidriv cross-slot (PZ) allows for precise and secure handling, while the break-resistant hardened construction provides additional robustness. These features make the R2 chipboard screws a reliable choice for professional craftsmen and DIY enthusiasts.
- Pozidriv cross-slot for precise handling
- Break-resistant hardened for increased robustness
- Plastic-sintered for improved sliding properties
- Galvanically coated for corrosion protection.
Screws
EUR29,48 EUR0,29/1pcs.
Reisser R2 Chipboard screws, flat countersunk head, PZ, partial thread, 6.0 x 90, steel, galvanised
100 Screws per piece