Best selling Threading taps + Threading dies from Ruko
This page always stays fresh and updates automatically.
1. Ruko Die holder DIN 225
For holding closed and slotted cutting tools to DIN EN 24231. It features steel handles, one of which can be unscrewed, and includes 5 screws for fastening the cutting tool. The design includes a housing made of die-cast zinc.
2. Ruko Machine tap DIN 371C M8x1.25mm HSS TiN 6H
High-performance tap made of high-speed steel with a titanium nitride coating. Universally applicable for a wide range of materials due to the hard material layer. Suitable for through holes and blind holes in unalloyed and alloyed steels up to 900 N/mm² strength, as well as stainless steels. The thread is cut in a single operation. Note: Cutting speeds starting from 10 m/min. The TiN wear protection coating increases the surface hardness to approximately 2,500 HV. Titanium nitride is a chemical compound of the two elements titanium and nitrogen. TiN is a metallic hard material with a typical gold-yellow color. Advantages: higher hardness, lower friction coefficient, longer tool life. Cooling is not necessary but is recommended.
3. Ruko 232020VA
Machine tap made of cobalt-alloyed and vaporized high-performance high-speed steel. Suitable for through threads and blind hole threads in unalloyed and alloyed steels up to 1000 N/mm² strength, as well as stainless steels. The thread is cut in a single operation. "Vaporizing" refers to the deposition of a non-metallic oxide layer. Vaporizing acts as a separating layer and reduces the occurrence of cold welding. Cold welding occurs when workpiece chips weld onto the flank of the tap, damaging the produced thread. Consequences of cold welding include torn and rough thread flanks. VAP improves the adhesion of lubricants to the tool surface. The illustration is schematic. Smaller diameters may be supplied with a tip due to production reasons.
4. Ruko Machine tap HSSE-Co 5 DIN 371 Form B vaporised M 10
Machine tap made of cobalt-alloyed and vaporized high-performance high-speed steel. Suitable for through holes and blind holes, in unalloyed and alloyed steels up to 1000 N/mm² strength, as well as stainless steels. The thread is cut in a single operation. "Vaporizing" refers to the deposition of a non-metallic oxide layer. Vaporizing acts as a separating layer and reduces the occurrence of cold welding. Cold welding refers to workpiece chips that weld onto the flank of the tap and damage the produced thread. Consequences of cold welding include torn and rough thread flanks. VAP improves the adhesion of lubricants to the tool surface. The illustration is schematic. Smaller diameters may be supplied with a tip due to production reasons.
Threading taps + Threading dies
−23%
EUR15,95 was EUR20,72
Ruko Machine tap HSSE-Co 5 DIN 371 Form B vaporised M 10
5. Ruko Machine tap DIN376 B M30x3.5mm HSS-Co5 6H (232300E/)
Cobalt-alloyed high-performance high-speed steel machine tap. The higher heat resistance results in a longer tool life. Suitable for through holes and blind holes in unalloyed and alloyed steels up to 1000 N/mm² strength and non-ferrous metals. The thread is cut in a single operation. Similar to HSS high-speed steel, with a cobalt alloy of 5%. This heat-resistant material is used for machining materials with higher strength and in long cutting channels with significant heating. The 5% cobalt content provides higher heat resistance and load capacity. The illustration is schematic. Smaller diameters may be supplied with a tip due to production reasons.
Threading taps + Threading dies
−32%
EUR53,11 was EUR77,60
Ruko Machine tap DIN376 B M30x3.5mm HSS-Co5 6H (232300E/)
6. Ruko Machine tap DIN 371C M10x1.5 mm HSS 6H
Machine tap made of high-performance high-speed steel. Suitable for through holes and blind holes in unalloyed steels up to 800 N/mm² strength. The thread is cut in a single operation. High-speed steel, commonly known as HSS, refers to a group of alloyed tool steels with up to 2.06% carbon content and up to 30% alloying elements such as tungsten, molybdenum, vanadium, cobalt, nickel, and titanium. HSS materials are characterized by high hardness, wear resistance, and heat resistance up to 600°C. HSS tools are less sensitive to shocks and vibrations, which can quickly lead to breakage in harder cutting materials. The illustration is schematic. Smaller diameters may be supplied with a point due to production reasons.
7. Ruko Machine tap DIN376 C 7/8 x9 HSS-Co5 2B (266078UNC/)
Cobalt-alloyed high-performance high-speed steel machine taps. The higher heat resistance results in a longer tool life. Suitable for through holes and blind holes in unalloyed and alloyed steels up to 1000 N/mm² strength and non-ferrous metals. The thread is cut in a single operation. Similar to HSS high-speed steel, with a cobalt alloy of 5%. This heat-resistant material is used for machining materials with higher strength and in long cutting channels with significant heating. The 5% cobalt content provides increased heat resistance and higher load capacity. The illustration is schematic. Smaller diameters may be delivered with a tip due to production reasons.
8. Ruko 235203
The hand tap consists of heavy-duty high-speed steel. It is suitable for through threads and bottoming threads in unalloyed and low-alloyed steels up to a strength of 800 N/mm², malleable cast iron, and non-ferrous metals. The thread is cut in three operations.
9. Ruko Handgewindebohrer M DIN 352 HSS MS, geschliffen M 10
The hand tap M DIN 352 HSS MS from Ruko is a precise tool designed for processing through and blind hole threads. It is suitable for unalloyed and low-alloy steels with a strength of up to 800 N/mm², as well as for ductile cast iron and non-ferrous metals. The tap cuts the thread in three working stages, ensuring high accuracy and quality of the thread. With an inner diameter of 8.5 mm and a pitch of 1.5 mm, this tap is ideal for applications that require reliable thread production. The right-hand cutting direction and compliance with DIN standard 352 make it a versatile tool for various machining processes.
- Suitable for unalloyed and low-alloy steels up to 800 N/mm² strength
- Cuts threads in three working stages for high precision
- Compatible with ductile cast iron and non-ferrous metals
- Right-hand cutting direction for easy handling.
10. Ruko Maschinengewindebohrer M DIN 376 HSS Co 5 TiAlN M 20 Gewindelänge 25 mm
Features: Machine tap with overflow shank and right-hand spiral flutes at 35° RSP for blind hole threads. Machine tap made of high-performance high-speed steel. Suitable for blind hole threads in unalloyed, low-alloyed, and alloyed steels up to 1200 N/mm² strength and cast iron. The thread is cut in a single operation. The TiAlN wear-resistant coating increases the surface hardness to approximately 3,500 HV. Titanium aluminum nitride is a chemical compound of the three elements titanium, aluminum, and nitrogen. TiAlN is a metallic hard material typically black-violet in color. Advantages: The TiAlN coating allows cutting tools to operate dry, eliminating the need for cooling. Higher hardness, very low coefficient of friction, optimal tool life.
Threading taps + Threading dies
EUR59,25
Ruko Maschinengewindebohrer M DIN 376 HSS Co 5 TiAlN M 20 Gewindelänge 25 mm
Product order
See all products