Best selling Ventilation technologies from Stiebel Eltron
On this page you'll find a ranking of the best Stiebel Eltron products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Stiebel Eltron FILT SET 180/280 G4-F7
High-quality filter set for supply and extract air. PM1 fine dust filter for the supply air and standard filters for the extract air. Low pressure loss and high dust holding capacity. Application: Ventilation units.
2. Stiebel Eltron STIE heating circuit manifold
Stiebel Eltron Heating Circuit Distributor HKV-8
Manufacturer: Stiebel Eltron
Designation: Heating Circuit Distributor
Type: HKV-8
Version: Other
Height: 551 mm
Width: 763 mm
Depth: 107 mm
Application: The pre-assembled heating circuit distributor for underfloor heating is mounted on a sound-optimized base plate and connected via stainless steel piping to the integrated mounting rail. All connections of the apartment station are equipped with ball valves on the mounting rail and are pre-assembled. The venting, flushing, and draining devices are directly integrated into the distributors. A holder for the subsequent installation of a controller terminal block is included. The heating circuit distributor is specifically tailored to the apartment station in terms of its dimensions, connections, and fastenings.
EAN: 4017212025710.
3. Stiebel Eltron Accessories
Stiebel Eltron Accessory Cond C125
Manufacturer: Stiebel Eltron
Designation: Accessory Cond C125
Type: Cond C 125
Design: other
Material of the duct: plastic
Material quality of the duct: other
Production type: other
Material of the insulation: other
Surface protection outside: other
Surface protection inside: other
External color: white
Nominal diameter of the duct: 125 mm
Connection 1: other
Connection 2: other
Bend design: smooth bend
Angle of the bend: 139.5 °
The 90-degree bend with integrated condensate drain is made of plastic. This accessory allows for the safe drainage of condensate when the ventilation unit is mounted vertically. Thanks to its special design, the condensate can easily collect without being influenced by the airflow. With this connection, the ventilation unit can be used in warmer regions, as there is no risk of water leaking into the installation area even in high humidity. The 90-degree bend with condensate drain simplifies installation in confined spaces. The bend allows the ventilation unit to be installed not only horizontally on the ceiling but also vertically on the wall. Compatible with ventilation ducts DN 125. Easy to screw on with standard market condensate pipe DN 32.
4. Stiebel Eltron LVE WDA 125
Stiebel Eltron Air Distribution System LVE WDA 125
Manufacturer: Stiebel Eltron
Designation: Air Distribution System
Type: LVE WDA 125
Execution: uninsulated duct
Material of the duct: plastic
Material quality of the duct: polypropylene (PP)
Production type: other
Surface protection outside: untreated
Surface protection inside: untreated
Perforated inner wall: no
Outer color: gray
Nominal width of the duct: 130 mm
Nominal height of the duct: 52 mm
Connection 1: insertion end
Connection 2: duct end
With sliding profile: no
With sliding clamp: yes
Bending behavior: rigid
Length: 230 mm
Working length: 230 mm
Embedable in concrete: no
Antibacterial design: no
Antistatic design: yes
The wall/ceiling outlet is made of corrosion-resistant, odor-neutral plastic. It is equipped with a removable connection adapter and offers the possibility to connect a flexible LVE onfloor air duct. Since the connection adapter can be rotated 180°, only one outlet is needed. The large and aerodynamically optimized cross-section in the fitting reduces the flow velocity and noise, allowing for a higher air volume flow when needed.
5. Stiebel Eltron Outer screen LWE 40
The LWE 40 external cover from Stiebel Eltron is a high-quality accessory for ventilation technology, specifically designed for outdoor use. Made from robust, brushed stainless steel, this cover not only offers an appealing look but also high resistance to weather influences. With its compact dimensions, the external cover integrates harmoniously into various architectural styles and ensures effective air circulation. The LWE 40 BA S is ideal for use in residential and commercial properties, contributing to improved air quality. The careful craftsmanship and thoughtful design make this product a reliable choice for those who value functionality and aesthetics.
- Made from high-quality, brushed stainless steel for durability and corrosion resistance
- Optimized for effective air circulation in outdoor areas
- Versatile for use in various building types and styles.
6. Stiebel Eltron LTM TL 1230 BA VA E6
Stiebel Eltron external bonnet stainless steel BA VA E6W R2 S4
Manufacturer: Stiebel Eltron
Designation: External bonnet stainless steel LTM TL 1230
Type: BA VA E6W R2 S4
Material: Stainless steel
Nominal width duct: 260 mm
Nominal height duct: 250 mm
Front width: 284 mm
Front height: 279 mm
Installation depth: 155 mm
With wire mesh: No
With insect screen: No
With pressure relief flap, blow-out: No
With pressure relief flap, intake: No
With counter-rotating flap valve: No
With co-rotating flap valve: No
With installation frame: Yes
Lockable: No
Motor-controlled: No
Colour: White
Further details: External bonnet for wall termination on the facade. The mounting frame has an integrated drip edge and a bird protection grille for mounting on the telescopic housing. Sealing to the plaster level is achieved using a sealing tape. Any condensation is safely drained away from the plaster level.
7. Stiebel Eltron LWE-W 115 P FG VA SB
The LWE-W 115 P FG VA SB facade grille from Stiebel Eltron is a high-quality solution for building ventilation. Made from stainless steel, it offers a durable and corrosion-resistant construction suitable for various applications. With a nominal width of 70 mm and a nominal height of 316.5 mm, this facade grille is designed to allow efficient air circulation. The front width is 260 mm and the front height is 250 mm, ensuring optimal integration into the facade. The installation depth of 50 mm facilitates easy installation. The grille is equipped with a mounting frame, which simplifies the assembly process. It is a practical choice for anyone who values functionality and quality.
- Made from stainless steel for high durability
- Integrated mounting frame for easy installation
- Optimal air circulation through thoughtful design
- Suitable for various applications in building ventilation.
8. Stiebel Eltron End cover
The end cap from Stiebel Eltron is a high-quality accessory for ventilation technology, specifically designed for pipes with a diameter of 160 millimeters. Made from galvanized steel sheet, this end cap provides a durable and corrosion-resistant solution for various applications in air management. With a length of 40 millimeters, it ensures a precise and secure seal that meets the demands of modern ventilation systems. The end cap is manufactured in the Czech Republic and combines functionality with a solid construction that ensures reliable performance. It is an essential component for anyone seeking an effective and efficient ventilation solution.
- Made from galvanized steel sheet for increased durability
- Designed for pipes with a diameter of 160 mm
- Secure sealing with a length of 40 mm.
9. Stiebel Eltron Telescopic housing 800mm for LWE40
Stiebel LWE 40 TG-800 housing 236663.
10. Stiebel Eltron FMK M5-1 FBF Replacement filter cassette for filter box FBF
FMK M5-1 FBF for filter mats for ventilation systems LWA 252 and filter box FBF 160, M5 filter (fine dust: mist droplets, pollen, rock dust), 1 piece.
Ventilation technology
EUR24,56
Stiebel Eltron FMK M5-1 FBF Replacement filter cassette for filter box FBF