Best selling Car stereo installations
Here’s a ranking of the best selling Car stereo installations. To give you a quick overview, we’ve added the most important information about each product. This page always stays fresh and updates automatically.
1. Monacor Fga-40mf
Signal interference and hum loops that can occur when connecting PC sound cards or laptops to amplifiers are avoided with the galvanically isolating filter. It features galvanically isolated inputs and outputs, equipped with 2 RCA sockets and 2 RCA plugs.
2. Monacor Fga-40hq
High-quality earth isolator to prevent signal interference and ground loops that can occur, for example, when connecting a car radio to an amplifier.
- Gold-plated RCA sockets
- Input/output impedance: 12 kΩ
- Frequency range: 20-30,000 Hz
- THD: < 0.001%
- Transmission ratio: 1:1
- Dimensions: 42 x 29 x 96 mm, Weight: 110 g
Safety and warning notices: The device is suitable for indoor use only. Protect it from dripping water, splashes, high humidity, and heat (permissible ambient temperature range: 0 - 40 °C). If the device is to be permanently taken out of service, bring it to a local recycling center for environmentally friendly disposal.
3. ACV 30.5000-01 Cinch-Entstörfilter
ACV 30.5000-01 Cinch interference suppression filter.
Car stereo installations
−24%
only 1 piece on sale
EUR7,99 was EUR10,47
ACV 30.5000-01 Cinch-Entstörfilter
4. FeinTech ATG00101
The ATG00101 effectively prevents humming and sound disturbances between powered devices by galvanically isolating the ground connection in audio connections. The ground isolator removes interference such as the typical 50 Hz hum, ensuring clear audio transmission without sound loss. It is suitable for all connections with 3.5 mm jacks, for example, between a computer and active speakers, a television and an AV receiver, a smartphone and a car radio, or stereo systems. The device eliminates ground loops without compromising sound quality. It simply plugs in between the devices to be connected and requires no power supply or additional connection cables. With a compact size of just 60 x 20 x 20 mm, it can be discreetly placed. The ground isolator is particularly useful in vehicles, where sound disturbances often occur when a smartphone is playing music while being charged. Thanks to the true galvanic isolation, these noises are reliably eliminated. Technical specifications: Impedance: 600 Ohms, frequency range: 20 Hz to 20,000 Hz, connections: 2 x 3.5 mm stereo jacks, bidirectional.
5. ACV Pioneer Cable LFB
Radio connection cable for ACV, Blaupunkt, Kenwood, and Pioneer. Radio manufacturers use different variants for connecting a steering wheel remote control interface. Depending on the manufacturer and device, single cable controls, two and multi-cable controls, as well as jack controls may be used. The connection variant is specified in the radio manufacturer's manual. All connections must be made before connecting the interface to the vehicle. Additionally, the LFB function may need to be programmed according to the radio manufacturer's manual in a radio menu. Check functionality before final assembly. Our support team is happy to assist with selection. Note: Connection: 12 Pin Microfit / 3.5 mm jack. LFB radio connection cable for ACV LFB interfaces. LFB radio connection cable for info adapters. For the following applications: Blaupunkt 2010 / 3.5 mm jack connection, Kenwood 2017 / 3.5 mm jack connection, Pioneer 3.5 mm jack connection.
6. ACV 1-DIN RB Megane Scenic
Radio Trim 1-DIN
Many car manufacturers install their own vehicle-specific radios that are visually adapted to the center console. For this reason, you need a suitable radio trim for replacing it with a standard DIN or double DIN radio. Additionally, vehicle-specific radio connection cables, antenna adapters, steering wheel remote control adapters, camera adapters, and active system adapters are often required. Our support team is happy to assist you in making the right selection.
Suitable for the following vehicles:
- Renault Mégane I Coach/Coupé (BA/DA) 10/1995 - 06/2002, 2/3-door / 4/5-door
- Renault Mégane I Scénic (JA) 11/1996 - 08/1999, Van
- Renault Mégane I Classic (LA) 02/1997 - 07/2003, Sedan
- Renault Mégane I (EA) 04/1997 - 08/2003, Convertible
- Renault Mégane I Grandtour (KA) 03/1999 - 07/2003, Station Wagon
- Renault Scénic (JA) 09/1999 - 06/2003, Van
Color: dark gray.
7. ACV 281352-02 Car radio installation panel DIN Suitable for (car brand): Volvo
1-DIN radio trim. Many car manufacturers install their own vehicle-specific radios that are visually adapted to the center console. For this reason, you need a suitable radio trim for replacing it with a standard DIN or double DIN radio. Additionally, vehicle-specific radio connection cables, antenna adapters, steering wheel remote control adapters, camera adapters, and active system adapters are often required. Our support team is happy to assist with the right selection. For the following vehicles: Volvo 740 (704/744) 04/1984 - 05/1992 sedan, Volvo 740 (704/745) 03/1985 - 05/1992 wagon, Volvo 760 (704/764) 05/1982 - 06/1990 sedan, Volvo 760 (704/765) 03/1985 - 06/1990 wagon, Volvo 940 (944/945) 06/1992 - 12/1996 sedan/wagon, Volvo 960 (964/965) 08/1990 - 12/1996 sedan/wagon. Color: black.
Car stereo installations
−6%
EUR17,78 was EUR18,90
ACV 281352-02 Car radio installation panel DIN Suitable for (car brand): Volvo
8. Monacor Ground filter, stereo - line, 3.5mm jack cinch
Erdisolator with a compact design that prevents signal interference and ground loops that can occur when connecting PC sound cards or laptops to an amplifier.
- Galvanically isolated inputs and outputs
- 2 RCA connectors
- 3.5 mm stereo connector
- Input/output impedance: 20 kΩ
- Frequency range: 20-30,000 Hz
- THD: < 0.01 %
- Transmission ratio: 1:1
- Dimensions: Ø 24 mm x 38 mm, Weight: 32 g
- Length including connection cable: approx. 115 cm
Safety and warning notices: The device is suitable for indoor use only. Protect it from dripping water, splashes, high humidity, and heat (permissible ambient temperature range: 0 - 40 °C). If the device is to be permanently taken out of service, dispose of it in an environmentally friendly manner at a local recycling facility.
9. ACV 381352-05 Car radio installation panel double DIN Suitable for (car brand): Volvo
2-DIN Radio Frame for Volvo
Many car manufacturers use their own vehicle-specific radios that are visually adapted to the center console. For this reason, you need a suitable radio frame to replace it with a standard DIN or double DIN radio. Additionally, vehicle-specific radio connection cables, antenna adapters, steering wheel remote control adapters, camera adapters, and active system adapters are often required. Our support team is happy to assist you in making the right selection.
Note: In this vehicle series, there are three different slot sizes. The first series of this model is visually characterized by the absence of a decorative strip around the radio and climate control unit, where the frame 281352-06 fits. The second series of this model is marked by a surrounding decorative strip. Vehicles from 09/2003 to 09/2004 differ from those of the following years. The same applies to vehicles with OEM HU 603. No solution available here.
Suitable for the following vehicles:
- Volvo S60 (R/H) 09/2004 - 01/2009 Sedan
- Volvo V70 (S/J/JV) 09/2004 - 07/2007 Station Wagon
- Volvo XC 70 (S) 09/2004 - 07/2007 Station Wagon - Offroad Version
Radio frame - metal frame - decorative cover frame - mounting kit
Color: black.
Car stereo installations
EUR44,19
ACV 381352-05 Car radio installation panel double DIN Suitable for (car brand): Volvo
10. ACV 12-1321-51 CAN Bus Kit Audi
CAN-Bus Kit Audi ISO-/Power ISO/Mini-ISO + DIN Antenna Connection + Active System
When the factory-installed OEM radio in a vehicle controlled by CAN Bus is to be replaced with an aftermarket radio, a specific CAN Bus adapter is required. Both specific and universal CAN Bus adapters convert relevant digital data from the vehicle-specific data bus into analog signals. Depending on the adapter, various signals or comfort functions such as ignition power, lighting, reverse gear signal, or speed signal are read and provided in analog form for different retrofit solutions.
Note:
CAN-Bus Connection: ISO / Mini ISO
Outputs are loadable up to 1A
Antenna adapter ISO phantom power / DIN active system adapter semi-active and fully active
Suitable for the following vehicles:
Audi A2 (8Z) 11/1999 - 07/2005
Audi A3 (8L/8P) 08/2000 - 12/2006
Audi A4 (B6/B7) 11/2000 - 02/2009
Audi A6 (4B/C5) 05/2001 - 03/2005
Audi TT (8N) 09/1998 - 07/2006
The following signals are provided:
Ignition
Lighting
Reverse Gear
Speed Pulse.
Product order
See all products