Top-rated products in the Water cooling connection accessories category

Here's a ranking of the top rated products in this category. To give you a quick overview, we've also added some key information about the products.

1. Phobya ATX jumper plug (24 pin)

If the power supply is bypassed and the CPU power remains connected (4- or 8-pin connector on the motherboard), it will lead to the irreversible destruction of the motherboard and CPU. Note: Do not turn on ATX power supplies without a load! Make sure whether you need a 20-pin bypass connector or a 24-pin one!. 

2. Corsair Hydro X Series 90° XF Adapter 2-pack

Corsair Hydro X Series XF fitting adapters allow you to add Y-splits and 90° angles to the tubes of your custom cooling system, whether you are using hardline, compression, or soft tubing connections. The XF fitting adapters are made from solid brass and feature a securely sealed rotating mechanism. They are coated with a range of durable finishes that match your system. 

3. Alphacool Spray bottle Core

Simple fillings - even in the most intricate systems. With the Alphacool Core spray bottle, water cooling systems can be filled accurately and effortlessly. The long and flexible nozzle allows access to even the farthest corners of the system. This makes it easy to reach and fill hard-to-access reservoirs without any issues or risks.

The empty bottle can also be used to drain the system. It works simply by squeezing it like a large pipette. The suction effect draws the water into the bottle, eliminating the need for cumbersome tilting maneuvers of the system.

Technical details:
- Color: Clear
- Material: PE-LD
- Capacity: 250 ml
- Delivery includes: 1x Alphacool Core spray bottle - 250 ml. 

4. Corsair Hydro X Series 45° XF Adapter 2-pack

Corsair Hydro X Series XF fitting adapters allow you to add Y-splits and 45° angles to the tubes of your custom cooling system, regardless of whether you are using hardline, compression, or push-fit fittings. The XF fitting adapters are made from solid brass, feature a securely sealed swivel mechanism, and are coated with a range of durable finishes to match your system. 

5. Corsair Hydro X Series XF Adapter Fill port

The Corsair Hydro X Series XF fill port adapter makes it easy to fill and drain your custom cooling system, featuring dual-sided G1/4" threads and a supplied G1/4" plug. A threaded locking ring also simplifies the installation on your case and allows for a secure attachment of the fill port to openings for easy access from the outside. 

6. Corsair Hydro X Series XF Rotary Y-Splitter

Corsair Hydro X Series XF fitting adapters allow you to add Y-splits as well as 45° or 90° angles to the tubes of your custom cooling system, regardless of whether you are using hardline, compression, or barb fittings. The XF fitting adapters are made of solid brass, equipped with a securely sealed swivel mechanism, and come with a range of durable finishes to match your system. 

7. Bitspower X-Cross Fitting

Limited by space in your custom water loop? Looking for a way to reduce the number of bends in a pipe and can't use a 90-degree swivel fitting due to space constraints? Bitspower presents its cross fitting, which allows you to save space. With a slim height of 18 mm, Bitspower cross fittings fit perfectly into tight constructions, as you can offset your line by 5 mm. 

8. Aquatuning Kink protection spring single 13mm (100mm long)

Individual kink protection spring for 13/10 mm hoses. The kink protection springs are 100 mm long and have an inner diameter of 13 mm. They are ideally suited for laying hoses around tight radii. The spring effectively protects the hose from kinking. 

9. Aquatuning O-ring 48 x 2.5mm (Laing DDC pump)

This is a replacement seal for the popular Laing DDC 1T and 1 Plus pump. Damage to the important internal O-ring can occur during the conversion with new covers. To ensure you can reuse the pump, we offer the appropriate replacement part here. Dimensions: 48 x 2.5 mm. Delivery includes: 1x sealing ring. 

10. Aquatuning Eheim 1046/48 inlet and 1250 outlet adapter to G1/4'.

With the G 1/4" adapter for the Eheim 1046/48 it is possible to use connections with G1/4" external thread. The adapter is simply screwed into the front of the pump and can be used if an expansion tank is not required. It has an O-ring seal.(3/8" to 1/4" adapter)

Please note: Do not turn the adapter "dry", as the O-ring may twist and then leak. Therefore, moisten the O-ring before screwing in, then there are no problems.

Note: Tightening the pump adapter too much can cause the plastic casing to break. The tightness is already guaranteed by the contact of the O-ring and a slight, hand-tight rotary movement. 

See all products