67,59 EUR
Philips Hue Wandschalter Modul
Questions about Wandschalter Modul
What's your question to the Community?
Helpful answer
No, this has a battery.
If the two wires from the module are short-circuited via a connected wall switch contact, there is a Hue signal.
I do not recommend exposing these wires to a voltage of 230V as the insulation is not suitable for this.
The 230V wires previously switched with the switch must be short-circuited so that there is continuous voltage on the lamp.
In terms of safety, this intervention
Helpful answer
No and yes. The WSM is only connected to the physical switch. If this is activated, the WSM sends a zigbee command to the bridge. This then switches whatever is programmed. The motion detector does the same. The cables that were previously on the switch are bridged with a WAGO 221. The load is therefore always on. Of course, you can use the WSM in parallel with the motion detector and control the same
Helpful answer
One module has two inputs. Yes, 2 lamps are possible. Please note that both must be switches or push-buttons. You can configure switches or push-buttons in the Hue app.
