Compact LED downlight in a square design. Recessed downlight with a frame for cut ceiling openings. Tool-free ceiling installation via quick-mount clamps. Square ceiling cut-out size of 150 mm. Installation depth >= 130 mm, luminaire height 133 mm. With a matte glossy coated plastic reflector. Color of the ceiling mounting frame: silver. Symmetrical light distribution characteristic and half-value angle: 60° Very Wide Flood. Light guidance through collimator/lens technology. Limitation of direct glare according to UGR 19. Equipped with an LED module. Luminous flux of the luminaire 1,400 lm, power consumption 13 W, luminous efficacy of the luminaire 112 lm/W. Light color warm white, closest color temperature (CCT) 3000 K, general color rendering index (CRI) Ra= 80. Color point tolerance (initial MacAdam) = 3 SDCM corresponds to a very high color consistency of the LED in application. Average lifespan L90(tq 25 °C) = 50,000 h, average lifespan L80(tq 25 °C) = 70,000 h. The light source is replaceable according to ecodesign requirements. Permissible ambient temperature (ta): -20°C - +25°C. Housing and heat sink made of aluminum die-cast. Protection class (EN 61140): II, protection rating (DIN EN 60529): IP20. Protection rating on the room side: IP54. Impact resistance grade according to IEC 62262: IK02/0.2 J, test temperature glow wire test according to IEC 60695-2-11: 850 °C. With a 3-pole terminal block for mains connection up to 2.5 mm², as well as a separate 3-pole mains relay box. With electronic control gear, switchable. The mains connection of the control gear is made via a terminal block. The control gear is replaceable according to ecodesign requirements. The luminaire is silicone-free. The luminaire meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. Additionally, the luminaire is ENEC certified by an independent testing body.