Best selling Abrasives from Pferd
This page always stays fresh and updates automatically.
1. Pferd Circular brush Pipeline RBG 17806/22.2 PIPE ST 0.50 76Z PU: 10
Aggressive and robust brush that is able to withstand high mechanical loads. Perfect for heavy-duty brushing in pipeline and container construction.
2. Pferd Schruppscheibe
The E 180x4.1x22.23 mm Ceramic performance line SG Steelox grinding disc from Pferd is a high-performance grinding disc that has been specially developed for fast and economical grinding of steel and stainless steel. With its ceramic grain, it offers a high stock removal rate and a long service life, making it an ideal choice for demanding grinding applications. The disc is designed for use at a maximum speed of 8500 rpm and enables efficient processing of materials. The combination of diameter and width ensures optimum handling and flexibility for various sanding tasks.
3. Pferd Abrasive pencil corundum flap disc F Ø 20 x 10 mm shank 6 A60 for grind & finish diameter S
Scope of delivery:
- 1x PFERD flap disc Ø20xH10mm grain 60
Product description:
Aluminum oxide A - with grinding flaps on a backing - for universal use from coarse to fine grinding - shaft Ø 6 mm
Technical data:
- Shaft Ø: 6 mm
- Drive type: straight grinder, flexible shaft drive
- Application recommendation: The removal rate should be increased by using a coarser grain rather than by increasing the pressure to avoid unnecessary tool wear and thermal stress on the workpiece. Use suitable grinding oil for the material to significantly enhance the lifespan and grinding performance of the tools. Increasing the cutting speed results in a slightly finer surface finish. Increasing the pressure leads to a slightly coarser surface. The softer the material being processed, the coarser the surface will be. Reducing the pressure and peripheral speed, as well as adding grinding oil, decreases tool wear and thermal stress on the workpiece. For optimal performance, use a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between removal rate, surface finish, thermal stress on the workpiece, and tool wear.
- Processable materials: Grey cast iron/spheroidal graphite (GG/GJL, GGG/GJS), copper, aluminum, cast iron, stainless steel (INOX), steel castings, hardened and tempered steels over 1,200 N/mm² (54 HRC), steels up to 1,200 N/mm². In commercial use, building regulations must be observed.
Abrasives
−76%
only 1 piece on sale
EUR4,64 was EUR19,37
Pferd Abrasive pencil corundum flap disc F Ø 20 x 10 mm shank 6 A60 for grind & finish diameter S
60
4. Pferd Fan grinder Ø25xH15mm grit 80 corundum shank-Ø 6 mm
Aluminum oxide A with grinding flaps on a backing is designed for fine grinding work on larger radii in tool and mold making. It is suitable for processing smaller and hard-to-reach areas in container and apparatus construction and offers universal application from coarse to fine grinding. This product is effective for processing fittings made of non-ferrous and light metals, including brass, copper, and zinc. The shank diameter is 6 mm.
5. Pferd Fan grinder
PFERD Router, 20x10 K 80
Shaft diameter 6 mm x 40 mm, made of aluminum oxide A, suitable for universal use on all materials. Ideal for fine grinding and polishing work in hard-to-reach areas in mold making, tool making, pressure vessel construction, and related apparatus. The recommended cutting speed is 15-20 m/s.
The packaging units contain 10 pieces.
6. Pferd Abrasive sleeve KSB 1530 A 60 Grain size (Ø x H) 15 mm 30 25 pcs.
The KSB 1530 A 60 grinding sleeve from Pferd is a versatile abrasive tool that is ideal for applications ranging from coarse to fine grinding. Made from aluminum oxide A, this grinding sleeve offers a long service life and is particularly suitable for processing various materials such as plastic, copper, stainless steel, brass, aluminum, and bronze. The grinding sleeve has a diameter of 15 mm and a length of 30 mm, making it a practical tool for precise grinding tasks. It is designed for use in series production, finishing, and assembly. The use of grease or grinding oil is recommended to enhance efficiency when working with lightweight metals. Please note that delivery is without a rubber holder, and the maximum speed is 36,000 revolutions per minute.
- Versatile for coarse to fine grinding
- Made from tear-resistant, fully resin-bonded material
- High grain adhesion for extended service life
- Recommended use of grease or grinding oil for lightweight metal processing.
Abrasives
Quantity discount
EUR5,50 per piece for 4 units
Pferd Abrasive sleeve KSB 1530 A 60 Grain size (Ø x H) 15 mm 30 25 pcs.
60
7. Pferd Sharpening rod DSB 25
The sharpening rod is used to restore the cutting ability of metal-bonded diamond cutting wheels, for example, after cutting lubricating materials.
8. Pferd Mounted point KE 3550 8 ADR 24 O 5 V na PU: 50
The conical shape KE is suitable for a comfortable working position in surface grinding and for grinding edges.
9. Pferd Sanding sleeve GSB 4530 A 240 PU: 100
The GSB 4530 A 240 grinding sleeve from Pferd is a versatile tool that is ideal for various grinding tasks. It is designed for both coarse and fine grinding, offering high efficiency in processing metal surfaces. With a diameter of 45 mm and a height of 30 mm, this grinding sleeve allows for precise and controlled grinding operations. The 240 grit ensures a fine surface finish, while the A corundum as the abrasive material guarantees a long lifespan and high material removal rate. The maximum speed of 12,700 RPM enables quick processing, making the grinding sleeve an indispensable tool for professional applications.
- Universal use for coarse to fine grinding
- High material removal rate due to A corundum
- Maximum speed of 12,700 RPM
- Efficient processing of metal surfaces.
10. Pferd PBU 1312/6 ST 0,35
The PBU 1312/6 ST 0.35 from Pferd is a high-quality abrasive tool that is ideal for light brushing tasks. It has been specifically designed for applications such as deburring, cleaning, and rust removal, providing an effective solution for various materials. With a diameter of 13 millimeters, this product is versatile and suitable for processing wood, plastic, and steel. The brush is engineered to deliver high performance at maximum speeds of up to 20,000 revolutions per minute, enabling efficient and precise processing. The packaging unit contains 10 pieces, making it a convenient option for regular use.
- Suitable for light brushing tasks such as deburring, cleaning, and rust removal
- Versatile for use on wood, plastic, and steel
- Maximum speed of 20,000 RPM for efficient processing
- Packaging unit contains 10 pieces for frequent use.
Product order
See all products