Best Ansmann products in the Car battery chargers category
On this page you'll find a ranking of the best Ansmann products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Ansmann Charger ALCS212 0.4
Car charger for maintenance-free lead-acid batteries (car battery) with 3.5m cable
The compact and very lightweight charger ALCS 2-12/0.4 is the ideal charger for lead-acid batteries in cars, boats, motorcycles, scooters, portable garden tools, or children's vehicles. A particularly long 3.5m cable is practical and allows for charging without an extension cord. Clear and easy handling is a given with the ALCS 2-12. Depending on the battery, the voltage can be adjusted via the rotary switch on the charger. With the help of the battery clamps, a quick connection to the lead-acid batteries is possible, and the charging process starts automatically afterward.
Suitable for 2V, 6V, or 12V lead-acid batteries with a capacity of 1.2Ah - 40Ah.
Chargeable are lead-gel, lead-absorbed glass mat, and lead-acid batteries in the voltages of 6V, 12V, and 24V. Charging occurs according to the IU characteristic curve with a charging current of 400mA, which gently charges car starter batteries. For visual monitoring, both the charging process and the end of charging are indicated by an LED.
Deep discharge of the battery is excluded, and gentle wintering is ensured.
In addition to actual charging, the ALCS 2-12 is also well-suited for maintenance charging. The battery can remain connected to the charger throughout the winter. This prevents deep discharge. Batteries from motorcycles, motorboats, lawnmowers, etc., get through the winter well and are ready for use at any time when needed. The same applies for intermediate charging as soon as the battery is weak or has not been used for a longer period.
2. Ansmann AutomatikLadegerät ALCT 624/10
The charger automatically detects when the battery is deeply discharged and gently charges the battery with pulsing currents for 20 minutes until a basic voltage is reached. After that, a normal charging program can be selected manually. The high-quality terminal clamps enable quick and reliable contact with lead batteries. The "Cold Temp Mode" is recommended at temperatures below 5 °C, ensuring that the battery is fully charged even in cold conditions.
3. Ansmann Charger for lead-acid batteries BC 6-12V / 10 A
The Ansmann BC 6-12V / 10 A is a versatile and powerful charger specifically designed for the safe and efficient charging of lead batteries. It supports both 6V and 12V lead-acid, lead-gel, and lead-absorbed glass mat batteries, as well as 12V LiFePO4 batteries. With a maximum charging current of 10 amps, this device is suitable for batteries with a capacity of 7 to 200 Ah. The charger features intelligent charging control with various charging programs that ensure optimal performance and longevity of the batteries. A clear LCD display allows for easy operation and monitoring of the charging process. Additionally, the device is dust and splash-proof according to IP65, making it ideal for use in workshops and outdoors.
- 10-stage charger for various battery types
- Six adjustable charging programs including RECOND mode
- Electronic protection against short circuits, reverse polarity, and overcharging
- Automatic maintenance charging to extend battery life
- Suitable for use in cold temperatures with COLD TEMP mode.
4. Ansmann Charger for lead-acid batteries BC 6-12V / 4 A
The Ansmann BC 6-12V / 4 A is a versatile and intelligent charger specifically designed for the safe and efficient charging of 6V and 12V lead-acid batteries, including lead-acid, lead-gel, and lead-fleece batteries, as well as 12V LiFePO4 batteries. With its 10-stage charging technology, it offers optimal performance for batteries with a capacity of 4 to 120 Ah. The device is equipped with intelligent charging control that operates even in frosty conditions and features various safety functions such as reverse polarity protection, overcharge protection, and short circuit protection. Additionally, the charger is dust and splash-proof (IP65), making it ideal for use in various environments. The option to use the charger in standby or parallel operation allows for continuous charging, even while connected devices are in use. The selection of intelligent charging programs ensures that the batteries are charged gently and efficiently.
- 10-stage charging technology for optimal performance
- Intelligent charging control with various charging programs
- Dust and splash-proof (IP65)
- Safety features such as reverse polarity protection and overcharge protection
- Suitable for standby and parallel operation.
5. Ansmann Charger for lead-acid batteries BC 6-12V / 2 A
Charger for 6V and 12V lead-acid batteries (lead-gel, lead-absorbed glass mat, lead-acid). The high-quality clamps allow for quick and reliable connection to the lead-acid batteries. Clear LCD display – easy to use. RECOND mode for deeply discharged or damaged batteries. Selectable COLD TEMP mode for low temperatures. Battery fault detection. Electronic protection against short circuits, reverse polarity, and overcharging. Automatic recharging when the battery remains connected to the device. Ideal for winterizing lead-acid batteries. Deep discharge protection. Power cable 160 cm, charging cable 160 cm. Dust and splash water protected thanks to IP65.
6. Ansmann Charger for lead-acid batteries BC 6-12V / 6 A
The Ansmann BC 6-12V / 6 A is a versatile and intelligent charger specifically designed for the safe and efficient charging of lead-acid, lead-gel, and lead-absorbed glass mat batteries, as well as 12V LiFePO4 batteries. With a maximum charging power of 6 amps, this device is suitable for batteries with a capacity of 4 to 150 Ah. The charger features user-friendly operation via a clear LCD display and allows selection from six different charging programs, including a special reconditioning mode for deeply discharged batteries. Thanks to its robust construction, the device is dust and splash-proof according to IP65, making it ideal for use in workshops and outdoors. The integrated safety features, such as protection against short circuits, reverse polarity, and overcharging, ensure safe usage. The charger is also equipped with an automatic maintenance function that allows for continuous battery maintenance without the need to remove the device.
- 10-stage charger for 6V and 12V batteries
- Six adjustable charging programs for different battery types
- Reconditioning mode for deeply discharged batteries
- Electronic protection against short circuits and overcharging
- Dust and splash-proof according to IP65.
7. Ansmann Charger for lead-acid batteries BC 6-12V / 1 A
5-Stage Car Charger with Automatic Voltage Detection for 6V and 12V Lead-Acid, Lead-Gel, and Lead-AGM Batteries
Intelligent and Safe Charging Control
With numerous features, our 5-stage charger BC 6-12V / 1 A ensures safe and gentle charging of lead batteries with a capacity of 4 - 30 Ah. It guarantees optimal performance and a long lifespan for the batteries.
The charger is dust and splash-proof (IP65) and includes the following electrical safety features: reverse polarity protection, overcharge protection, deep discharge protection, and short circuit protection.
Additionally, our intelligent charger is suitable for standby/parallel operation and can remain continuously connected to the battery. It keeps the battery fully charged, even when the battery is simultaneously under load or being discharged.
After connecting the battery, the charger automatically detects the battery voltage (6V or 12V). The LED display blinks green during the charging process and remains solid green when the battery is fully charged.
Fully automatic, intelligent 5-stage charging
1. Battery Check: After selecting the charging mode, the charger checks the status of the battery.
2. Desulfation: By pulsing current and voltage, sulfate is removed from the lead plates of the battery to restore maximum battery capacity.
3. Bulk Charging: Constant current charging with the maximum charging current.
4. Voltage Check: Battery charge level check.
5. Maintenance Charging: If necessary, a pulse maintenance charge occurs to prevent battery discharge.
