
Ergotron Hx
Table, 49"
Ergotron Hx
Table, 49"
Hello I don't know about the 57", but it is very stable with the 49". Look on the Ergotron website to find the right one: https://www.ergotron.com/fr-fr/outils/recherche-expresse Have a nice day
Hello, I couldn't answer you but it works perfectly with my Samsung UltraWide 49 inch
Unfortunately, we cannot obtain the USM Haller table variant from our suppliers.
According to our information, this monitor mount is easily compatible with the monitor you mentioned.
We have no information on this. When an item is taken back, it is thoroughly checked and only then released for resale. This has also been done for this item.
for the 49" neo g9 from almost zero bottom edge of monitor on table to approx. 20-30cm from table, not measured
It has Vesa 100x100 and weighs less than 15kg. So I think so. I have the bracket and another Samsung. The ultra-widths are virtually all the same in their basic design.
Hello, yes, stability is perfect with this arm. The screen is held in place and nothing moves.
I have the same moni on there, it has a screw in the arm for tightening. Should be visible in the assembly instructions. Tighten with the 4mm Allen key at the top of the arm. The force is increased in the clockwise direction. Greetings
The monitor arm is not designed for ceiling alignment (upside down). The arm is placed on the base, which allows the maximum direction of rotation with small Allen screws. Even if you try (against all reason) to mount the base on the ceiling, the arm will fall down at the latest when it is hanging with a weight of just 5-8 kg, as the small Allen screws are not designed for hanging loads.
yes, that should work. mine is heavier.
You need this part: Samsung Wall Bracket You should have already received it with the monitor.
Not suitable for 57 inch. Horizontal bracket is too weak for the projection of the 57 inch. Always tilts down. Had to make special adjustment to keep it horizontal. The extension arms are strong enough.
You don't need anything else. If you carry out the assembly correctly, you can easily do it on your own. Because it is a well thought-out system.
Supply and demand!
HX HD is better for the weight!
I drilled the table for the installation and it works very well, the ergotron system is expensive but effective, I have a 49" and when I tighten the fastener I have no play anywhere...
It doesn't matter. I wouldn't choose the monitor based on the mount, rather the other way around. Just look at the VESA size.
I assume that it is only the module for the monitor.
The arm is very stable, I have the Samsung Neo G9 in 49". The table was bought at Ikea and is a fake wooden table (5cm thick). I have never fully extended the arm but I don't think it should be a problem. The mounting plate of the Ergotron is quite large compared to others. The money is worth it, I have already bought it twice because it convinced me so much.
Hi Tim, I have two Samsung 49 LC49HG90DMRXEN directly above each other in use. I had to search for a long time and finally decided on the "Neomounts by Newstar FPMA-D960DVBLACKPLUS". Please note that you will need the wall brackets supplied with the monitors to mount them BN96-42913B BN61-14898B Samsung Monitor Wall Bracket (No. 324686683974). I have to admit that this solution is not optimal either and aligning the two monitors so that it fits was quite tricky, especially with a weight of 15 kg per monitor. But it worked and the mount is stable and serves the purpose.
Yes there is, but unfortunately not at Digitec.